fox_racing_guy
-
Posts
645 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Events
Posts posted by fox_racing_guy
-
-
You just lean it over on it's side stand so the rear wheel is off the ground. Ever turn your streetbike around on the side stand by leaning it over to get both wheels off the ground then spinning it 180 deg? Same concept. This model of Go-Ped is direct drive, no clutch. The gas motor has about a 4" drive shaft that looks like it is covered in 80 grit sandpaper, the motor is on a pivot mount and there is a turnbuckle that you adjust to hold it tight against the rear wheel.
-
When the motor is cold you lean it over on the kickstand to start and warm the engine. After the motor is warm you flip up the kick stand, stand on it then kick off. It always fired right up then you ride away. Yes you just use the brake to stop and kill the motor.
-
-
$264 direct from Snap-On http://buy1.snapon.com/catalog/item.asp?item_ID=630591&group_ID=675031
These are like new and 1/2 retail is a fair price.
The Snap On torque wrench I also have for sell is well used but still a great tool. I always had it calibrated once a year.
-
Tom of hits on this combo and it sold through facebook.
-
SOLD!
-
SOLD!
$100
Snap On Part # QJR-3200B
Calibrated last Nov.
I switched brands is the reason for sale
For fastest service e-mail me 1foxracing@gmail.com
-
SOLD!
$130
Snap On part # RXFMS606B
For fastest service e-mail me 1foxracing@gmail.com
I switched brands is the only reason for sale
-
SOLD!
$100 for all 3
For fastest service e-mail me- 1foxracing@gmail.com
Upgraded my tool storage and now have this 3 piece unit for sale
Top- Kobalt ball bearing slides
Mid- Craftsman ball bearing slides with grip latch
Base Craftsman
Have keys for the locks on the top & mid, padlock does NOT come with base.
-
They never were officially imported into the USA and there was so few made none of them ever had serial #'s engraved.
-
SOLD!
On Craigslist to a overseas buyer with a story. somehow A guy found my bike for sale in Italy I noticed the .it e-mail address and thought SCAM but replied for the Hell of it. This fellow got on a plane (with his english speaking niece) and flew here to purchase it with no further proof that I even owned it other then my shitty pics on craigslist. They flew into Cleveland, rented a minivan then drove to my house. He handed me 5 Benjamin Franklins before I even open my garage to show it to him. The guy was in tears when he put his hands on it. He thanked me many, many times before loading it into the minivan and driving off.
So if you are selling something on craigslist and get a reply from overseas don't automatically discard it. OK if it's from Africa you can bin it.
-
-
SOLD
-
SOLD!
Last Mountain bike I have. Frame alone was $1,600 and around a total of $5,000 invested with all original receipts in hand.
Made in Italy goodness!
Full XTR/Raceface components. Marzocchi Fly fork Time ATAC pedals.
This frame was never officially imported into the USA and I had to jump through hoops to acquire it.
Size- 48.5cm
Price $500
Contact 1foxracing@gmail.com
-
SOLD!
I know wrong time of year to sell but I cleaned out my garage over the weekend.
Much quieter then my other one and will heat a 1 car garage very nicely.
Will run off a 20lb gas grill type cylinder or even better with a larger tank.
Price $50
Location New Philadelphia area but I can haul to my office on the Akron/Barberton border Mon-Thur only.
-
SOLD!
I know wrong time of year to sell but I cleaned out my garage over the weekend.
Loud as Hell but will heat quickly
Will need a 100lb propane tank to run properly and check my other for sale thread if you don't own one.
Price $75
Location New Philadelphia area but I can haul to my office on the Akron/Barberton border Mon-Thur only.
-
SOLD
No longer need this and it has a little propane in it. When full it weighs 170lbs
I live close to New Philadelphia and can't fit this in my car to haul North.
Price $65
Contact - 1foxracing@gmail.com
-
SOLD!
I use to carry this in my truck when riding MX in case of needed repairs at the track. I never had to use it.
Craftsman Part # 34122
Price-$75
Fastest contact e-mail me at 1foxracing@gmail.com
I live close to New Philadelphia and my office is on the Barberton/Akron border and I can haul it North Mon-Thur only.
-
SOLD!
I bought this around 2002 to ride around Mid-Ohio, they outlawed them the same year (no gas powered vehicles without a plate) so I bought a Yamaha Zuma. This has pretty much been sitting in my garage since. I did fire it up a couple days ago for a test ride and it runs well. It is direct drive, if the motor is running the wheel is turning so no for the uncoordinated.
I've only ever ran LL100 and Klotz 2 stroke in it at the recommended 32:1
Price $250
Fastest contact e-mail me at 1foxracing@gmail.com
-
SOLD!
Sold my pick-up over the weekend so I won't be needing this any longer. I live close to New Philadelphia and my office is on the Akron/Barberton border so I can haul it North Mon-Thur only.
Price-$75
Fastest contact e-mail me- 1foxracing@gmail.com
-
Western Reserve posted this on pitracer.com today.
Sunday, May 18th- 8:00Gate, 10AM Practice, Race at NOON
150% Pro payout, with additional $500 to winner.
$10 gate fee, those riding bikes to track admitted free (as always)
CRA classes
www.westernreservemc.comRide your streetbike and get in for free!
-
From this morning.
-
2
-
-
I got a tip on a couple Osprey nest at Atwood lake, going to try and make it out there this weekend.
-
Go-Ped Bigfoot gas powered scooter $250
in Other Stuff
Posted
Might have been mine, that's where I sold mine through. really no louder then a weed eater. Come to the MX track and tell me what you think is louder, a 250 2-stroke V a 450 Thumper. No contest for me, some of the 4 stroke exhaust ( Yoshimura) will make your ears bleed!