Murse

Sold

Set of (4) 19” Axis XR wheels in grey mounted to Michelin X-Ice Xi3 tires 245/45r19 with gen1 TPMS. I used them for 4 seasons and about 14,000 miles in total. I say “about” because I can’t find where I wrote down the mileage when I installed and removed them for the first season. So it’s just an estimate. Pick-up only. They are currently located in Lancaster Ohio but I can have them ready in Grove City/Columbus Ohio if needed. $600 https://columbus.craigslist.org/pts/d/grove-city-tesla-model-winter-wheels/7408220254.html

I guess I should also mention I am using the SKR mini E3 v2 board. I tried glass (and still have it) but prefer the flexible magnetic build surface. I may have to go back. I may not even have a warped bed. It could be a nozzle issue. I had put a new nozzle on it after I finished my last big print. But I haven’t printed anything since that because I was out of town and life happened. I would still like to utilize the bltouch.

Looking for help with my Ender 3. Im at my wits end with troubleshooting and ill pay in beer or money! I was having what seemed like a warped bed issue where at the corners it was good but between that it wasnt. so I bought a BLTouch thinking that I can have it measure every spot and know exactly what height to be at. But I cannot get it to work. Ive tried setting the z-offset and then I go to print a bed level test print its too high or too low. Ive made changes VIA pronterface and everytime i get a different result. I am in New Albany so if you are close, great! if not, where do i need to drive to?! Its just been so frustrating. i watched a bunch of videos and have been reading so many reddit threads.

It’s a Grasshopper 430D 72” deck. Kubota diesel engine. Listed for $6800. New tires on it too

My dad is looking to sell his diesel grasshopper zero turn. Its a 430D. Ill get some more info on it for you.

Its RWD and since mine is an early 2013 parking sensors were not even available yet. I have no autopilot, just regular ole cruise control!

Its a 2013. I did buy it used with about 58,000 miles on it. I am actually the 3rd owner. The 2nd owner bought it CPO from Tesla and put less than 9,000 miles on it before trading it in for a Sequoia. That CPO warranty transferred over. One thing to note with these early models is that everything was a la carte. Where now there are only a few options. So when you are looking at them keep that in mind if there is an option that is important to have. I would absolutely buy it again. Its been a fantastic car. My next one will be a dual motor version with autopilot. Those are the only 2 things I wish it had

Thanks Steve! Tim I will text you and set up a time soon to do that. All the dust and stuff just sticks to the dew on the back and then it drys.

Tim I cant thank you enough. She still looks amazing! Its a true testament of your skill and expertise. I get tons of compliments on it and nobody can believe she has just over 92,000 miles. Without having a garage its really difficult to keep it clean for any length of time. The ceramic coating helped with keeping it looking clean longer as well as making the washing process easier. The only fine scratches I can see are on the rear bumper cover and even those you have to look really close to find. Iron deposits are also showing up more back there. (I tried an iron remover which helped a little) Ive been using CarPro Reload and Reset with the 2-3 bucket method. This last time I did try Gyeon Bathe+ and a coating of Bead Maker. Im not sure I'm entirely sold on the Gyeon. It didnt foam like I had expected. Any suggestions?

I cant edit the original post but the bike mount has been sold. The sim rig and phantom 4 are all that remain

I just put on the Pilot Sport A/S 3+ on mine and love them. I only have 1000 miles on them so far but they are incredibly quiet and really sticky. I have a set of Continentals on the summer only wheels and they are quite hard and noisy. The Michelins seem to be more predictable in the wet as well.

These were used for 2 seasons. I opted to run the 19s this summer vs. the 21s so I put some Pilot Sports on her to replace these. These have only been dismounted this one time as they were dedicated winter wheels and tires. 2017-2018 = 9,506 miles 2018-2019 = 9,176 miles Tire depth in mm (NOT 32nds) left/middle/right with direction forward Tire 1 = 6.49/7.33/7.0 Tire 2 = 5.3/5.4/4.7 Tire 3 = 5.17/5.5/5.66 Tire 4 = 6.69/7.25/6.4 (this tire does have a plug just right of the center line) 5mm=6/32 Tire 1 Tire 2 Tire 3 Tire 4 Side DOT

weekend bump

Moving soon and upgrading a few things so I thought I would offer it up on CR before putting everything on ebay. Let me know if you have any questions about any of it. Turtle Beach Recon Camo - SOLD Its a nice headset. I just upgraded to the Astro A50 and no longer need this one ASUS MeMO Pad 7 LTE - SOLD I have really never used it. I am just too deep in the Apple universe that its hard to use something else. Thrustmaster T300 Ferrari Alcantara edition with T3PA pedal set PC/PS4- $350 This is an awesome setup and I wish I had the space to build a rig around it. Seasucker Bomber 3-Bike - $350 I am getting the Tesla roof rack since I plan on carrying a canoe now too. I need the crossbars now. This rack is great and I have had no problems with it. DJI Phantom 4 - $550 Great drone. I barely use it anymore as the main projects it was bought for are over. It has 2hr1min of total flight time over 17 total fights. Let me know if you have any questions. Feel free to email me at slammedcrx(at)gmail(.)com as well. Josh