Siebec

Everything sold.

Boots are sold.

A* S-MX Plus,size 45/10.5.  Used these on the track, they have scuff marks but are in good condition.  Haven't used them in years, they have just been sitting. $60

Knox Aegis back protector. 7 plate.  I only used this a few times, it's in like new condition.  Has been sitting, don't have a use for it anymore. $60.

Located in Tiffin, Ohio.  I am willing to travel a reasonable distance, but will to ship for actual shipping cost.

Take both for $100.

Sold.

2007 Yamaha R6s, 6600 miles. Michelin pilot power 2CT tires with lots of tread left, graves frame sliders, flush mount turn signals and integrated tail light. $5500. Located in Findlay, OH

Are these AA's or the Winchester promo loads? I'm in for 2k (possibly more) if they are AA's.

Depending on the type of loads I would be interested. I am looking for trap loads 7.5 or 8's either handicap loads 1235fps+ or 16's around 1145fps.

PM sent.

Same here, will be signing up tomorrow for Int.

http://www.opticsplanet.net/mueller-optics-4-5-14x40mm-ao-apv-rifle-scope.html

Excellent scope for the money.

I'm signed up for both days, will be up there Friday evening.

Thank you everybody to put this on, it was a great time. I learned a lot and I'm glad I finally got my knee down!

Yep...this can be locked.

Love this stuff....goes great on pretty much anything.

Thanks. Sent him a PM.

Looking into doing some track days this year and I would like to buy a 1pc suit. I figured I would ask here first to see if anyone had one for sale before I go out and buy a new one. I am 5'8" and about 185lbs. Thanks!

Low sided the bike this weekend and I am looking for a few parts.

- Right side head light assembly (lens, backing etc..)

- Right side headlight faring - Front faring stay

- Right side Upper, mid and lower fairings

- Right side mirror

- in the middle of the bike under where the air intake is, there is a black plastic piece held in with plastic pop rivets, I need the middle piece.

Looking for blue parts.

Thanks!

Lost all of mine in a tragic boating accident.

I looks like the adjustment bolt is still there thankfully. There is quite a bit of vibration around 4k rpm however. I was hoping replacing that bolt would take care if it, but it does seem like a good time to check all the nuts to make sure they are still tight. Thank you everyone for the help, this is an awesome site!

Yeah ReconRat that makes sense now, I did not realize the adjust bolt came in through the back. It looks like there is just a nut on the out side. Thanks for the help.

Here is the best I can do with pictures for now.

I think I received or ordered the incorrect part. Does anyone happen to have a picture of what I am looking for?

I looked at the schematic a little closer and it seems like I need #29 and #30. Thanks for the site. I looked all over and didn't find anything like that.

Yeah that's the shaft I am talking about I just need to know what part goes on the end of it. It seems like it would be a hollow bolt that is threaded on the inside and the outside due to the fact that the frame is also threaded where the shaft comes through.

I am missing what looks to be like a rear engine mount bolt on my '04 R6. I can't tell exactly what kind of bolt I need. It's located diagonal from the oil dipstick downward. I wanted to make sure I am getting the correct type of bolt from the dealership before I spend money on it because I seems expensive.

There is a shaft in the middle through the engine and frame the end is threaded and the inside part of the frame is also threaded. I am looking for what ever threads into the frame and on the end of the shaft at the same time.

I don't currently have a camera but I may be able to get one if a pic is needed to better explain.