c7fx

The tail has two relays one for the fuel cut off and the other is a bank angle. Take the relay from the high beams its on the left side front and swap it with the two relays in the back. Easy way to rule out the relays. They are all the same so no worries.

bump

16 hours ago, JustinNck1 said:

I have a Handy electric lift with this vise. They are very nice. GLWS

Thanks. It is a nice system

I'm selling just the cycle vice off my Handy lift looks like the picture except its black. Works perfectly and can be mounted on other lifts.

I'm asking 125.00         

prefer pick up but will ship at buyers expense 

Spring time bump get it out of my garage 

the experts should show which symbols they're buying

well Lei today lol

I'm doing well in biotech 

My opinion the only thing HF stuff is good for is sitting on the curb waiting for the garbage truck to pick up.

SOLD

bump

red one still for sale blue sold

still have one stand great condition 75.00 pick it up

Back in 2009 I had my 09 R6 reflashed. Doing so matched everything that the YEC ECU did.  I also had a PC that I used to dial in the motor on the dyno. This worked for me and was cheaper than going the YEC route.

The Yamaha R6's needed to have the ECU's refreshed if you really wanted to unlock lost Hp. I'm not sure how the newer bikes are since I have been out of the game since 2011.

yep thats Mid-ohio as owndjoo stated.  I would try a little more pressure in the front and see if it gets better say 34 hot.

stand is still available pm me if your interested I don't check this all the time

checked with them....can get the unit with only one batt....have to wait till end of the month before additional batts are available.  So will wait till end of month and then decide what to do. I believe that the prop guards that I got will work on either the 2 or the 3 but not positive.

trust me you won't want to fly with them unless your flying indoors. I bought them because I was so worried about it and found that they only add weight and act like a sail which can cause VRS vortex ring state

why don't you just buy one from DJI?  I love flying mine and have gotten some great videos and pictures.

your getting the phantom 3 pro for the same price as a phantom 2+v3 yes I would take that deal. I'm seeing the phantom 3 pro with one extra battery for 1300 and the same deal with a 2+ for 1169 also the phantom 3 advance for 1099.

If this is your first copter and worried about crashing I would buy the phantom 3 advance save some money. Don't get the prop guards unless your flying indoors. 

I bought mine directly from DJI took maybe 10 days 

Ouch. I got my 6500 watt coleman on craigslist for $300. Starts first pull, runs whole house.

and probably loud as F_ck.

I don't get rotor noise but I have noticed video jello mostly caused by wind or unbalance props. It doesn't happen much but with a good gust I notice it and usually is very brief.

I have better antennas on the bird and the controller plus boosters for both the 2.4 and the 5.8ghz signals.

Well, I finally bit the bullet and dropped a load of greenbacks on a new DJI Phantom 2 Vision + Quad copter drone.  Will spend a couple of days getting to know the system which is truly a professional setup. Once I get to the point of comfort with it, I will post up some videos.

I have had mine since last year and its a blast. I have flown mine over 3000 feet away. I should be able to go over a mile away with the modifications I did to the antennas

woodcraft best I have ever used 

finally a nice day to test my new antenna and just have some fun. I flew about 2,000 feet away still with FPV I could have gone farther but wasn't sure of how much battery I had since I made the mistake of flying with the wind and would have to fight the wind on the way back. I also just spent time playing with my settings. Here is a screen shot from a video I did.

Didn't think they would do that much damage! Looked like an older guy, maybe he just had fragile skin. Lol

 Nope they are dangerous and some people get carbon fiber blades that take chunks out of the body.  I always give the copter lots of room when landing.

Not bad but be careful with your dog or yourself. Those propellers can cause some serious damage. At least if they are anything like mine. 

Here is an example and why I don't hand catch.