2thDr

Bike, spares, tires, and suit are all gone. Lock it up. Thanks

Bumpity. I will have pictures up tonight

08 cbr 1000. Has under 7K miles. Oil was changed every other track day. My situation has drastically changed overnight, and I will likely not be getting back to the track this year, and the extra money could help. I will get pictures up, when the new bodywork arrives. MODS Vortex: gas cap, clipons, BRAND NEW rearsets (GP shift - reversible), spare set of rearsets (partial) Woodcraft: sliders, case savers (left and right) with replaceable skid plates. Brakes: steel braided front lines, Galfer SBK front rotors, lightened rear rotor cut with water jet, SBS pads, Castrol SRF fluid. Suspension: tuned by D2 cycles of KC; set for ~180lb rider, Traxxion AK20 valves in forks with 1.05 springs, OEM shock, Lee's racing cycle link Ignition / tuning: keyless ignition, Z bomb, Dynojet Power Commander V custom mapped by Cafe Racer, Inc. Cordona quick shifter (push or pull) connected directly to power commander, emissions delete (intake flappers, PAIR valve block-off plates, exhaust servo motor removed with circuit bypassed to keep ECU codes clear), OEM air filter, Arrow GP2 slipon exhaust. Misc: BRAND NEW bodywork. Safety wired SPARES rear subframe front fairing stay 2 passenger seats passenger pegs tripples, top and bottom EBC XC front rotors brake and clutch levers 15, 16, 17 front gearing; 41, 42, 43 rear gearing includes sprocket carriers kick stand rear rim with rotor, front rim clutch pack, steels and fibers OEM right clipon OEM gas cap and ignition switch with key OEM left case cover, NEW OEM windshield OEM tank shelter with some crash damage, but completely usable (black) OEM left bar switches in bag with misc relays OEM fork internals OEM throttle tube OEM front fender with some crash damage, but completely usable (red) Various fairing pieces that can be used. At least 6 sets of take offs, including 2 sets of Dunlop slicks that have less than 15 laps on them, and one set of BRAND NEW Dunlop rain. I also have warmers, helmets, ect if the deal requires it. I will help with delivery free of charge for 100 miles. After that, the deal better be good, otherwise it will be on you. $7200 OBO

Sorry I'm so late to the party I was actually at this event on Sunday. I ran A with Motoseries for almost the entire year last year. My times were consistently in the 4-6's for a reference at the Beav. As it has already been stated, I couldn't sign up for A with nesba, as I don't have an expert license. I had asked the CR's in the morning for a bump and was not given it. I put down a few 4's in I traffic and still nothing. All the CR said to me was, keep doing what you are doing, and that my body position didn't look right. In the afternoon, I had a highside in turn 5, probably over riding a bit to try and get a bump. Not nesba's fault at all. Maybe I wouldn't have been pushing so much if I hadn't been trying to make myself known for a bump. IDK. I'm not sure where i'm going with this... I don't know if I'm bashing nesba, or supporting them. Um Ok. Carry on.

I don't know anything about the engine pictures that you posted, but they sure look impressive. Also, gotta love the titanium stuff. Keep up the good work!

Legit. I will do all this soon. Gotta get through a few tests this week. Guess it's public transportation until then. Thanks. I will get a video and pictures up of my findings when I get to this. Should be friday

I replaced the spark plugs the first time that this happened. I also did a coolant flush last week.

Ok... like clockwork the thing didn't start this morning. I'm at a loss...

It's baffling me too. I'm wonding if I'm getting a bad seal on my gas cap or something and getting some condensation in there somehow.

So I got it running. I held the throttle open and let it burn off whatever might have been in the system. It stayed on after that. I seme to be collecting moisture or something in the tank somehow and I just don't get it. Fuel lines and stuff looked fine. Once I replace it with new gas (only a gallon or 2) I can get it running.

Flushed the tank and put in new stuff last night; thinking it would behave like before. Nope. Didn't. Still not working. Hmph

I filled up at a different station. put 93 in at both places. My bike stays in a garage that stays around 55 degrees, unless it's warmer outside. I park at school in a garage, but the garage it open to the elements, so that would be the same at the outside. My ride take about 10 minutes of city driving, and the bike routinely get's up to around 200, then will sit in essentially the outside all day until I leave school.

UPDATE: Got the bike painted and it's been running fine. Filled it up again on sunday when it was warm and took her for a spin. Rode all week into school and back. Yes it was cold, but I don't care. Public transportation blows. Anways.... Went to start it today and it was doing the same thing as before. It would start and die. Then it would only start if I had the gas open, and once it's released it would die. Is it conceivable that I have gotten "bad gas" twice? Or is something else going on here? Am I accumulating moisture in my tank somehow? Happened both times after I filled up my tank, then rode for a few days.

You aren't kidding. I learned a ton of stuff because of this.