Moe7

SOLD - Please lock it up. First FBM buyer is taking it up to its new home in Cleveland.

FBM ad removed

2007 Audi A4 Quattro sedan 2.0T engine 6-speed manual transmission 137,5xx miles

Went through this a year ago, and for new models it holds true that you get what you pay for. We ended up with a NordicTrack Commercial 1750 (just a higher-end residential unit) during a good sale. It is a rather large and heavy unit, however, so may not fit your needs (it does fold and roll). With lighter/smaller units you're most certainly sacrificing in components and durability. We've had cheaper models and wanted something that would last this time around.

My M12 stubby can remove lug nuts torqued to ~90 ft/lbs, but if there's any corrosion or other mess it'll struggle. I'm planning on picking up the new M18 mid-torque for lug nuts and similar applications, but will keep using the M12 stubby anything less than that.

FYI - The Residential Permit Cheat Sheet on the following page is pretty helpful on this topic and suggests that a permit is required for a driveway extension. I'm in Orange Township as well, and while I haven't had to personally work with the Zoning Board/Department, I've heard they are reasonable and helpful. https://orangetwp.org/187/Applications-Fees-Permits

SOLD; lock it up please.

I got one of these a few years back cause it seemed cool, was $90 during some Amazon sale. https://www.amazon.com/GunVault-Speedvault-Biometric-Pistol-SVB500/dp/B006OGOHD0/ref=sr_1_5?dchild=1&keywords=gun+safe&qid=1596826848&refinements=p_89%3AGunVault%7CSentrySafe&rnid=2528832011&s=hunting-fishing&sr=1-5 The idea is alright, but in reality it is bigger, slower to open, and louder than I expected. Regardless, I'm not sure what other, better options there are nowadays.

Not specifically, but the Trimmer Plus attachment mechanism was fairly widely adopted by a number of product lines, as Clay noted. I do know it is not compatible with Ego products. Here is what the attachment end looks like: You're welcome to try them out and see.

Yo! I took a look at the parts diagram for your model and don't think they'll work. These need a square receiver in the upper shaft, and it looks like yours has the receiver in the lower shaft instead.

Bump. Putting these up on FB marketplace for $60 here soon.

Various Troy-Bilt TrimmerPlus Add-Ons. Compatible with a variety of different power heads, not just Troy-Bilt: -Hedge Trimmer (https://www.troybilt.com/en_US/trimmerplus/ah721-trimmerplus-add-on-hedge-trimmer/41BJAH-C902.html#start=5) -Cultivator (Mine is an older model - https://www.troybilt.com/en_US/trimmerplus/gc720-trimmerplus-add-on-cultivator/41BJGC-C902.html) -Blower/Vac (https://www.amazon.com/troy-bilt-bv720r-trimmer-blower-attachment/dp/b00004r9r8) I got these used a few years ago and someone stole my trimmer head before I could use them, so I have no idea how well they may work. $40 for all three.

Forgot to update; these are gone. Go ahead and lock it up.

Yakima rook rack and various components (links just for reference, actual components are from ~2005ish): -48” cross bars (https://www.yakima.com/crossbars) -WindShield fairing -Four Q Towers, note paint wear on top of towers (https://www.yakima.com/q-towers-4-pack) -Two Viper fork-style bike mounts (https://www.yakima.com/viper-2001-2016, note earlier skewers on mine) -Two sets of four lock cores (4 cores with one pair of keys, 4 cores with a different single key, additional key blank) -Q Clips (all have flaking, but only the bottom portion is visible outside of towers, I wrapped some with electrical tape) Six Q92 clips (used on 03 Acura CL) Two Q95 clips Four Q5 clips (for 07 Audi A4); 2 of which are new and unused To find what you’ll need: https://pit.yakima.com/ (select QTower (HISTORICAL); suggest eBay for other clips) -Six base pads, 2 of which are new and unused $200, prefer not to part out unless no interest as a package Blackburn TrakStand magnetic resistance bike trainer - $20

Pending pickup. Sent from my SM-G950U using Tapatalk