Moe7

SOLD - Please lock it up.

First FBM buyer is taking it up to its new home in Cleveland.

2007 Audi A4 Quattro sedan

2.0T engine

6-speed manual transmission

137,5xx miles

Went through this a year ago, and for new models it holds true that you get what you pay for.

We ended up with a NordicTrack Commercial 1750 (just a higher-end residential unit) during a good sale. It is a rather large and heavy unit, however, so may not fit your needs (it does fold and roll). With lighter/smaller units you're most certainly sacrificing in components and durability. We've had cheaper models and wanted something that would last this time around.

Tell me about the Milwaukee M12 Impact gun. I found a really good deal on one ($115) but have been holding back on pulling the trigger because it's an M12 and not an M18. Guy in the store said he doubted it would remove a lug nut but I don't think he had enough experience with them.

My M12 stubby can remove lug nuts torqued to ~90 ft/lbs, but if there's any corrosion or other mess it'll struggle.

I'm planning on picking up the new M18 mid-torque for lug nuts and similar applications, but will keep using the M12 stubby anything less than that.

Hey Carl, somewhat on topic, did you have to file an improvement claim request with Orange Township zoning or anything? I want to expand my driveway as well and have been wondering the opposite of you if zoning would complain instead of my HOA.

FYI - The Residential Permit Cheat Sheet on the following page is pretty helpful on this topic and suggests that a permit is required for a driveway extension. I'm in Orange Township as well, and while I haven't had to personally work with the Zoning Board/Department, I've heard they are reasonable and helpful.

https://orangetwp.org/187/Applications-Fees-Permits

I got one of these a few years back cause it seemed cool, was $90 during some Amazon sale.

https://www.amazon.com/GunVault-Speedvault-Biometric-Pistol-SVB500/dp/B006OGOHD0/ref=sr_1_5?dchild=1&keywords=gun+safe&qid=1596826848&refinements=p_89%3AGunVault%7CSentrySafe&rnid=2528832011&s=hunting-fishing&sr=1-5

The idea is alright, but in reality it is bigger, slower to open, and louder than I expected. Regardless, I'm not sure what other, better options there are nowadays.

Do you know what power head it is compatible with?

Not specifically, but the Trimmer Plus attachment mechanism was fairly widely adopted by a number of product lines, as Clay noted. I do know it is not compatible with Ego products.

Here is what the attachment end looks like:

You're welcome to try them out and see.

Morgan, I have a YardMachines Y2560 trimmer

https://www.menards.com/main/outdoors/outdoor-power-equipment/string-trimmers-edgers/yard-machines-reg-16-25cc-2-cycle-curved-shaft-gas-trimmer/rm2510s-41ad110g900/p-1444441256263.htm

 

It does have a coupler in the middle of the shaft, held together with a bolt. Any idea if these are compatible?

Yo!

I took a look at the parts diagram for your model and don't think they'll work. These need a square receiver in the upper shaft, and it looks like yours has the receiver in the lower shaft instead.

Bump.

Putting these up on FB marketplace for $60 here soon.

Various Troy-Bilt TrimmerPlus Add-Ons. Compatible with a variety of different power heads, not just Troy-Bilt:

-Hedge Trimmer (https://www.troybilt.com/en_US/trimmerplus/ah721-trimmerplus-add-on-hedge-trimmer/41BJAH-C902.html#start=5)

-Cultivator (Mine is an older model - https://www.troybilt.com/en_US/trimmerplus/gc720-trimmerplus-add-on-cultivator/41BJGC-C902.html)

-Blower/Vac (https://www.amazon.com/troy-bilt-bv720r-trimmer-blower-attachment/dp/b00004r9r8)

I got these used a few years ago and someone stole my trimmer head before I could use them, so I have no idea how well they may work.

$40 for all three.

Yakima rook rack and various components (links just for reference, actual components are from ~2005ish):

-48” cross bars (https://www.yakima.com/crossbars)

-WindShield fairing

-Four Q Towers, note paint wear on top of towers (https://www.yakima.com/q-towers-4-pack)

-Two Viper fork-style bike mounts (https://www.yakima.com/viper-2001-2016, note earlier skewers on mine)

-Two sets of four lock cores (4 cores with one pair of keys, 4 cores with a different single key, additional key blank)

-Q Clips (all have flaking, but only the bottom portion is visible outside of towers, I wrapped some with electrical tape)

-Six base pads, 2 of which are new and unused

$200, prefer not to part out unless no interest as a package

Blackburn TrakStand magnetic resistance bike trainer - $20

Pending pickup.

Sent from my SM-G950U using Tapatalk

Link to old thread:

http://www.columbusracing.com/forums/showthread.php?t=129925

They're just getting in the way at this point.

"225/50/17 Toyo Observe Garit KX (https://www.toyotires.com/tire/patte...serve-garit-kx), 6-7/32 thread depth

Mounted on B6 Audi Cabriolet Wheels (17x7.5, 5x112, 45mm offset) with a good amount of curb rash; mounting tabs are broken on 2 of the center caps; see pics

One tire/wheel has a slow leak, but I could not find any punctures. My best guess is corrosion and could be cleaned and remounted. It was slow enough that I just topped off every week/few days and lived with it.

I bought each of the tires and wheels used and had them on my 07 A4 for 2 winters; have had a company car for a few years now and rarely drive the Audi."

Pick up in Delaware (Orange Township) or I can meet you around here or northern Columbus.

No worries. When you get a chance.

Here are a few images of the tread on each, let me know if you want different views:

Tire 1 - https://imgur.com/l5HqQ0P.jpg

Tire 2 - https://imgur.com/TjulLg6.jpg

Tire 3 - https://imgur.com/o564wnX.jpg

Tire 4 - https://imgur.com/4U7PSYh.jpg

Do you have any additional pictures of the tire tread? Any patches/repairs to the tires?

Sorry for the delay, I will get some more pictures of the tread(s) tomorrow afternoon.

No patches or repairs from my use, and I am pretty certain there were not any when I picked them up (cannot say 100%). I will see if there are any obvious repairs tomorrow and let you know.

$175 OBO

Come get these out of my garage.

Sent from my SM-G950U using Tapatalk

225/50/17 Toyo Observe Garit KX (https://www.toyotires.com/tire/pattern/winter-performance-tires-observe-garit-kx), 6-7/32 thread depth

Mounted on B6 Audi Cabriolet Wheels (17x7.5, 5x112, 45mm offset) with a good amount of curb rash; mounting tabs are broken on 2 of the center caps; see pics

One tire/wheel has a slow leak, but I could not find any punctures. My best guess is corrosion and could be cleaned and remounted. It was slow enough that I just topped off every week/few days and lived with it.

I bought each of the tires and wheels used and had them on my 07 A4 for 2 winters; have had a company car for a few years now and rarely drive the Audi.

$200 $100; prefer pick up in Delaware (Orange Township).

This time of the year isn't helping your search either, as any decent commercial mower will be in use and/or demand top dollar. Stay diligent and something will come up from a company shutting down or homeowner moving.

 

Just to add another Craigslist datapoint:

 

Picked up April this year - 2013 Exmark Lazer S-Series, Kohler EFI, 52" deck. 1,500 hours, $2,500. It isn't pretty, but mechanically it is solid (municipality/school owned and maintained).

 

I was finding plenty of 60" Lazers with ~2,000 hours for between $2,500-3500 at the time and the main challenge was assessing condition, as you're finding. If you can wait till the off-season you can do pretty well.

Side note - I had sold myself on a new Scag Tiger Cat before this, so I understand your dilemma. I have no regrets and really like the old Lazer now though.

Yeah, that's what I'm finding. I like the fact that having a new one I would have a warranty, but hate the price tag that comes with it. I'm just going to keep looking. Maybe I'll get lucky.

This time of the year isn't helping your search either, as any decent commercial mower will be in use and/or demand top dollar. Stay diligent and something will come up from a company shutting down or homeowner moving.

Just to add another Craigslist datapoint:

Picked up April this year - 2013 Exmark Lazer S-Series, Kohler EFI, 52" deck. 1,500 hours, $2,500. It isn't pretty, but mechanically it is solid (municipality/school owned and maintained).

I was finding plenty of 60" Lazers with ~2,000 hours for between $2,500-3500 at the time and the main challenge was assessing condition, as you're finding. If you can wait till the off-season you can do pretty well.

I've got an Amcrest setup that I've been growing. Can be a bit involved to setup and get used to the interface, but provides plenty of customization for a consumer system.

I can combine PoE and wifi cameras, and record to a local NVR with a 6tb drive (even from my wifi cams).

Price is a bit higher, but you can always start with a camera or two and add-on later.

Sent from my SM-G950U using Tapatalk

I have the ATH-M50 if you want to try them out. I'll bring them in tomorrow.

Sent from my SM-G950U using Tapatalk