88lx5oh

where can i pick up some rac e gas... unleaded or l3eaded doesnt matter. how much am i looking to pay as well.

i need to find the wire to hook my msd rpm activated window switch into. i need to find the tach wirer. any help would be great Ryan

Im sure me and stolen5.0 can do it cheap for you. most likely half the price. just pm me or him and we can set something up maybe for this weekend.

Im in the looking for some new tread. What is the biggest size i can go on the front and the back on a fox body stang?? 7 inch pony rim mind you. I was thinking 245/50/16 on the back and 225/55/16 on the front.. wider the better on the back...... any suggestions... and what are a nice set of tires i can hook with.. but will give me a little bit of milage??

Brian, any help is greatly appreciated... i you ahve a PM

I jsut bought a NOS Stage 1 Nitrous kit (dry) for my Mustang. Is there any particular items i should buy for it... ie. bottle warmer, gauge, purge kit... What is a must have?

sometimes it does

the jerk feels like its coming form the rearend not the tranny. and if it is the clutch, why would it do this when im rolling down the interstate at 60 and let off the gas completely??

no clunk changing gears that i really noticed, a little bit of a clunk and low speeds when you hit the gas though... only sometimes

ok well at low speeds in mostly any gear, being off the pedal completely, i get a shutter, get pretty harsh at time, and only stops if you get on the gas some, or push in the clutch. this has been goign on since i did the tranny swap, and ill eliminate some things first, i did change the U joints. also when i did the tranny swap i still used the auto drive shaft, i called ford they said i could use it, its a little short but doesnt make any differnce. the only thing i could think of is maybe the rear end is going out, but if it is goignn out it should have been out by now, cause i do long burnouts, and drive it hard all the time. what do you guys think

im gonna have to say no, my pony rims will only hold 245/50s.... i think your gonan be pushing it on a 7 inch rim. your sidewall will be bulgin out pretty bad, and you might rub your inner fenderwell. i would stick with what ya got.

sr20 developement smile.gif

I have a 92 Kawasaki EX500, any one know much about these bikes, or street bikes in general... i wanna get a different upper fairing for it, maybe off a GSXR or something.... somethign more up to date for it... Plus the one i have now, the stock one is beat to hell... and needs replaced.. and the stock ones are hard to come by and pricy..

he isnt some run of the mill guy, he has a flow bench, and he has been doin the work for a while now, my uncle has 2 drag cars and thats where he gets his heads done at. The guy does an impressice job

well i plan on getting a good set of heads... but the guy whos gonna port and polish my stock heads is a friend of the family and i can get it done for $150 so.... i will gain more for my money right now. that way i spend a lil money on a throttle body, cam, and gears as well. And my car is a 5 speed... it was an auto, but i did a t5 conversion.

gonna be throwin a cam in my 88 lx 5.0 dont know which one to get... give me a few ideas. i was thinkin the E303, but im not quite sure. tell me what ya think. The heads are gonna be sent out here in a month or so, Port and polished and valve job, gonna pull the motor, got a leaky rear main seal. so gonna do the cam and heads together. give me some ideas... and what kind of powe gains you think ill get, also what it will raise my rev to.

ehh... not worth the money if you ask me. unless you get them dirt cheap.

get some header wraps and keep the heat out

come on im serious

i ahve an 88 lx 5.0 mustang, and im gonna get a gear, but i dont know what to get.. either 3.73s or 4.10s it will be my fun car, and i have a beater to drive so gas milage is no concern, what is my best bet... top end isnt really important, but i want enough to be competitive.

from what i hear the cross drilled rotors dissipate heat better...

e cam would be fine.... good cam actually

what do i need to change my stang form 4 to 5 lug wihtout buying a conversion kit??? wanna go wiht the 02 gt rims

need info on someone to do powdercoating. Place, Price, a number to the place. need the rims on my bike done.

AFR heads, GT40 upper and lowers, and blower... i dunno which blower to tell ya to go wiht... i like the vortechs they seem pretty durable, but you could go wiht a selfcontained unit. wont suck your oil pan dry, huh benji