slowZ28

I am looking for a used 2 bar map sensor for some bench testing. The brand or style doesn't really matter as long as it is a 0-5v output. Maybe someone upgraded to a 3 bar and has one laying around I can use for this test. PM me if you do. Thanks.

still available http://i564.photobucket.com/albums/ss89/pics595/NItrous%20Parts/DSCF1020.jpg

I have a GE mini-fridge. Great for dorm, office, basement bar or any place you have 110 current available. This has been sitting in my basement unused for a long time. I fired it up and it froze a bottled water overnight using the regular fridge part. There is a thermostat to control the temperature. It has a small freezer compartment and mini-ice cube trays. Pictures in craigslist ad: http://columbus.craigslist.org/hsh/2456871949.html

I am selling a Harwood fiberglass 4" cowl hood. It is a "Camaro Show Series smooth underside". The hood bolts on to the stock hinges and uses the stock latch. It has already been trimmed to fit. The cowl area was increased to allow for more airflow. In excellent condition painted a beautiful black color. Selling because I am going to use a pin-on hood instead. $400 local pickup only http://i564.photobucket.com/albums/ss89/pics595/Other/Hood.jpg

Edelbrock 72001 solenoid (.115 orifice) Like new big soelnoid was bought new and used only twice before car was taken apart. $70

I have the following nitrous lines for sale. They are used but in good working order. Pictures are available. 15060-2NOS 1/8" to -3AN red 24" $20 15070NOS -3AN to -3AN blue 36" $20 $35 for both

I have the following nitrous solenoids for sale: Edelbrock 72001 solenoid (.115 orifice) ** like new big soelnoid was bought new and used only twice ** $70 shipped Nitrous Super powershot solenoids (16020/16080) ** 1 nitrous (no fittings) $40 shipped ** 1 fuel (no fittings) $30 shipped ** these solenoids had the label removed so they are bare $120 shipped for all 3. Picture are available in the following photo album along with other nitrous parts that are for sale: http://s564.photobucket.com/albums/ss89/pics595/NItrous%20Parts/?albumview=slideshow

I have the following nitrous solenoids for sale: Nitrous Super powershot solenoids (16020/16080) ** 2 nitrous (no fittings) $55 each ** 2 fuel (no fittings) $45 each ** 1 Sniper nitrous solenoid with -4 screen fitting on inlet $60 Edelbrock 72001 solenoid (.115 orifice) NOS 16000 Cheater solenoid (.093 orifice) - $250 ** includes distribution block (-6 inlet) ** includes NOS Super Powershot purge solenoid ** like new big soelnoids were bought new and used only twice Picture are available in the following photo album along with other nitrous parts that are for sale: http://s564.photobucket.com/albums/ss89/pics595/NItrous%20Parts/?albumview=slideshow

I have a Wilson Manifold Nitrous Pro-Flow 2 Stage inline bar nitrous plate part number 303076 Here is a link to the plate on the Wilson website: http://www.wilsonmanifolds.com/shop/index.php?l=product_detail&p=28 I modified two of the burst panels for manifold vacuum reference. This can be reverted back to the way it was. I ordered the plate with nitrous bars only to be used in a dry nitrous application. The fuel bars can be added to the plate to make it wet. I am asking 250 shipped. Item is located in central Ohio. Picture are available in the following photo album along with other nitrous parts that are for sale: http://s564.photobucket.com/albums/ss89/pics595/NItrous%20Parts/?albumview=slideshow

I have a 4-hole throttlebody that has been machined to provide the maximum amount of flow through a 4150 flange manifold. It is now a 2 blade throttlebody that will flow over 1500 cfm. A custom idle air control housing was machined for idle control. It utilizes an LS1 IAC motor to bypass the most amount of air possible. This allows large aggressive cams to idle under 900 rpm! The center area has been machined so the center stud is no longer present. Instead a separate bracket is included to hold down any standard carbeurator air filter assembly. This unit will outflow anything on the market including the Wilson Manifold 472175 throttlebody which sells for over 700 dollars bare. I am selling this throttle body for $600 shipped including the following: Throttle position sensor, Billet IAC housing, LS1 IAC motor, Filter bracket, Progressive throttle linkage with return springs Pictures available at http://s564.photobucket.com/albums/ss89/pics595/ThrottleBody/?albumview=slideshow

T-tops still available

I have a brand new Accel HEGO narrow band O2 sensor with installation bung. The Accel part number is 77761 I am asking $50 shipped. Item is located in central Ohio. Picture: http://s564.photobucket.com/albums/ss89/pics595/EFI%20parts/?albumview=slideshow

still available

Gauge still available

I have the following nitrous lines for sale. They are used but in good working order. Pictures are available. 15060-2NOS 1/8" to -3AN red 24" $20 15070NOS -3AN to -3AN blue 36" $20 $35 for both.

still available

all lines sold except: 15060-2NOS 1/8" to -3AN red 24" - $20 15070NOS -3AN to -3AN blue 36" - $20 Price includes shipping. Will sell both for $30 cash picked up locallly.

ttt

10 pound Nitrous bottle (2 available) - $100 each ** full with 10+ pounds of nitrous each ** bottle certifications are not current ** 6" diameter bottle with hi-flo bottle valves Nitrous bottle holders - $20 each ** 1 plastic 1 aluminum $200 buys eveything.

ttt

ttt

ttt

I have a set of Accel (Bosch) low impedence injectors. They are rated at 83#/hr. http://www.jegs.com/i/DFI/310/74607/10002/-1 I ran them in a car that is not driven daily. It is cruised on weekends and the occational trip to the track. It has maybe 3,000 miles of use. $300 shipped. Email any questions.

ttt

ttt