slowZ28

I have a 4-hole throttlebody that has been machined to provide the maximum amount of flow through a 4150 flange manifold. It is now a 2 blade throttlebody that will flow over 1500 cfm. Excellent piece for a big block. A custom idle air control housing was machined to allow the most flow. It utilizes an LS1 IAC motor to bypass the most amount of air possible. This allows large aggressive cams to idle under 900 rpm! The center area has been machined so the center stud is no longer present. Instead a separate bracket is included to hold down any standard carbeurator air filter assembly. This unit will outflow anything on the market including the Wilson Manifold 472175 throttlebody which sells for over 700 dollars without sensors. I am selling this throttle body for $600 shipped including the throttle position sensor, IAC housing, LS1 IAC motor, filter bracket, progressive throttle linkage and return springs. Pictures available at: http://s564.photobucket.com/albums/ss89/pics595/ThrottleBody/?albumview=slideshow

ttt

Price is shipped

ttt

The 2 bar map sensor has sold. The other items are still available.

SOLD

SOLD

It currently runs over 13 dollars a gallon

I have 4 gallons of C-16 race fuel that I am not going to use. It is a leaded fuel. $35.00

http://s564.photobucket.com/albums/ss89/pics595/Driveshaft/?albumview=slideshow

http://s564.photobucket.com/albums/ss89/pics595/Driveshaft/?albumview=slideshow

I have a 3" steel driveshaft made from .083 tubing that was used to connect a 700R4 transmission to a Moser Ford 9" rearend in a 3rd gen camaro. It includes a Spicer yoke (27 spline) and U-joints. The U-joint diameter is 1-1/8”. The width is 3 5/8”. This part was made for the car and not used for very long so it is in great condition. The length from the rearend u-joint midpoint to the seal on the tailshaft is roughly 48.5 inches. U-joint to U-joint midpoint is roughly 45.5". $100.

I have a pair of glass T-tops that will fit 1982-1992 Camaro, Firebird, Trans-AM. They are in excellent condition and come with a T-top bag. I have pictures if interested. $125

I have a set of Accel (Bosch) low impedence injectors. They are rated at 83#/hr. http://www.jegs.com/i/DFI/310/74607/10002/-1 I ran them in a car that is not driven daily. It is cruised on weekends and the occational trip to the track. They have maybe 3,000 miles of use. $425.00

I have several EFI sensors for sale. The following are brand new and never installed: Accel 2-bar map sensor part number 74776 - $50 Accel HEGO narrow band O2 sensor and installation bung part number 77761 - $50 The following part is used: Accel 1-bar map sensor part number 74764 - $35 Pictures of these parts: http://s564.photobucket.com/albums/ss89/pics595/EFI%20parts/?albumview=slideshow

I am selling a used Aeromotive 13101 fuel pressure regulator. I'm including the gauge -4 fitting and the return line fitting. I have a -6 and a -8 fitting available. Let me know which one you need. http://store.summitracing.com/partdetail.asp?autofilter=1&part=AEI%2D13101&N=700+115&autoview=sku $100.00

I have several nitrous parts that are for sale. Email any questions. You can view these parts at: http://s564.photobucket.com/albums/ss89/pics595/NItrous%20Parts/?albumview=slideshow AutoMeter 3374 Sport-Comp Nitrous Pressure Gauge 2-1/16" full sweep electrical 0-1600 psi - $125 Wilson Manifold 2-stage inline plate 4150 flange w/burst panels - $250 ** Wilson part 303076 (plate ordered with nitrous bars only for dry nitrous kit) ** http://www.wilsonmanifolds.com/shop/index.php?l=product_detail&p=28 Edelbrock 72001 solenoid (.115 orifice) NOS 16000 Cheater solenoid (.093 orifice) - $250 ** includes distribution block (-6 inlet) + ** includes NOS Super Powershot purge solemoid ** like new used only twice last summer Nitrous lines solenoid to plate - $15/$20 ** 15340NOS -4AN to -3AN 12" Blue - $15 ** 15030NOS -3AN 12" Blue -$20 Nitrous valve with fittings - $50 ** -6 inlet -6 outlet -4 outlet for pressure gauge Nitrous bottle (2 available) - $100 each ** full with 10+ pounds of nitrous each ** bottle certifications are not current ** 6" diameter bottle with hi-flo bottle valves Nitrous bottle holders (3 available) - $20 each ** 1 plastic 2 aluminum Nitrous bottle heater - $75 ** pad and relay in perfect working condition but one strap is short. It can be lengthend see picture Nitrous powershot solenoids (16020/16080) - $65/$45 each ** 3 nitrous (no fittings) $65 each ** 2 fuel (no fittings) $45 each ** 1 Sniper nitrous solenoid with -4 screen fitting on inlet $65 NOS 15850 50 PSI nitrous pressure regulator - $40 ** for use with stock motor dry nitrous kits ** see http://www.jegs.com/i/NOS/741/05115/10002/-1 NOS vacuum hose tee 17538-59-SNOS - $20 ** see http://www.jegs.com/i/NOS/741/05115/10002/-1 Nitrous flare jets - $90 ** flare jets 28x2,32x2,38x2,42,46,52x2,63,71,82x2,87,91x2,93x2,102x2,120 ** flare sapphire jets 78,110

Deleted.

I am considering selling my wheels and tires for a different set Here is what I have and what it sells for new: 2-15x4 2.25bs Weld draglites 90-54342 139.99each 2-15x10 6.5bs Weld draglites 90-510352 196.99each (drilled for screws) 2-15x12 7.5bs Weld draglites 90-512354 209.99each (drilled for screws) 1-Tire screw kit 720-4318 12.99set (installed) 1-Valve stem kit 720-1957 14.99set (installed) 2-Sportsman Front 26x7.5-15 672-1572 99.99each (great condition) 2-MT ETStreet 30x13.50-15 672-3763 216.99each (almost done) 20-1.310'' long x .687'' dia. Shank Lug Nuts 601-1426 14.99per4 If I can sell this stuff to one person for 925 bucks (bottom dollar) I'll let it go. I am NOT splitting it up so please don't ask. If I can't find a single buyer then I will just keep it.

After traveling to Akron to race and multiple attempts to have AMC boys come to Columbus to claim the streets, the outcome has been failure. I am not surprised. The bottom line is the AMC boys believe it was my fault that the race didn't get off because I took too long to burnout??? While the video shows differently, as they were unable to successfully host a street race, I guess we will just agree to disagree. Now, they want me to travel back to Akron or meet at a neutral spot halfway (their way of getting out of racing me). I am tired of calling Sting and getting excuses. I'm not going anywhere. Their chosen flagger fucked up; so they can come here. After all, they want to own our streets. Therefore, it should happen in Columbus. So for now, they can claim to own whatever they want; but Columbus is not owned by an AMC. Soon, I will put my car away as the temperature continues to drop. If anyone local wants to race HEADS UP they can contact me directly because I'd rather race than post BS on the Internet.

Did Tilley sell his vette to get a Viper? ...did someone say dig?

ttt

I am selling an MSD 7AL-3 Box in perfect working order. Never installed in engine compartment. It is many years old but has not seen much use. Always stored indoors. Price is 325.00

A 42 jet is about 75 HP and a 37 jet is about 50 HP. That's make a 40 jet about 60 HP.