Jump to content

Thanks to Fast Frank!


RidersDiscount

Recommended Posts

We had good success with our pit stops this past weekend and I need to send out a THANK YOU to Fast Frank.  If you are looking for a quick change set-up or just want to make your life easier on pit stops check out what Fast Frank can do for you.  We aren't selling Frank's products however I wanted to show what can be done with not too much effort.
 
 
We used Fast Franks front and rear axle set up as well as his front fender mounts.   These three items helped us change both front and rear tires in under 10 seconds while at Daytona.
 
Here you can see the front axle which uses a cone to not only protect in the event of an off, but the cone also allows you to get a grip on the axle to pull it out.
 
Front Axle
2014FastFrank_1.jpg
 
Here is a shot of the front fender mounts.  These are attached to the fork leg lower and allow the forks to rotate.  This rotation lets the calipers disengage the rotors when you pull forward on the wheel.
2014FastFrank_8.jpg
 
Rear Axle
2014FastFrank_4.jpg
 
2014FastFrank_10.jpg
 
Frank has two different axle nuts that you can use.  The picture above is the original mount and below you will find his new captive mount.  This captive mount makes sure you don't push the nut out of the way when you are driving the axle through using an air gun at 180 psi.
 
2014FastFrank_6.jpg

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...