Jump to content

Tail lights out/ same filament work as parking light


motocat12

Recommended Posts

I noticed my repaired tail light housing was loose again, pulled it apart plastic welded it cleaned connections bolted it all back together and Installed the bitch (loose nuts on the interior of the tail.

No Tail lights!

pulled it apart checked everything both filaments work (3 wire lights) all seems fine but no power on the loom side. fuse good... blah blah.

That ignition spot past the steering lock for parking lights ( i really don;t understand that and it's dangerous to drain the batter under a cover) tail lights come on.

I swapped out the digital signal relay for the original no change, disconnected the battery to reset, no change.

bad ecu? faulty ignition (headlight works) what's left

 

 

Edited by motocat12
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...