Jump to content

WTB - 748 or (adjustable) 900ss Forks


what

Recommended Posts

Title says it all. Looking to buy a set of late 90's/early 2000's 748 forks or the adjustable showa forks from a 900ss. Need to be in working condition, internals will more than likely be replaced because I'm fat. 

 

Long shot I'm sure, but hey. 

Link to comment
Share on other sites

On 11/16/2016 at 6:37 AM, Isaac's Papa said:

Did you scour eBay? Monster 900 forks should also fit. 

I've been looking at eBay, but I'd rather buy a pair from someone on here if possible than a mystery set on eBay with mystery rash and mystery dents. ;p

 

I'll look into the monster forks. I assumed they were the same as the 900ss forks since the bikes share about everything else. 

Link to comment
Share on other sites

15 hours ago, vf1000ride said:

I have a set of stock 2006 Showa Ducati 749 forks.  Not sure if they will work for what you're after.

Unfortunately there are a few measurements that are different between the 748/749 forks. Essentially to get the 748 forks to work with my 750 clamps, I need to machine out the upper triple to 53mm and shim the lower triple with a 1mm piece of metal. Everything else bolts right on. The 749 forks would require brackets/spacers to mount the brakes/fender and I would need to pick up a 749 wheel as I think the axle is a few millimeters different between the two as well. 

 

A full front-end swap may be possible with the 749 components but I think even then the triples are a bit wider so I'm not sure about clearance with the fairings. Would be interesting, but I think I'll stick with looking for 748/996 forks for now. Thanks though! 

Link to comment
Share on other sites

  • 4 weeks later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...