gt-titan Posted January 13, 2005 Report Share Posted January 13, 2005 im getting ready to put in a new cam,lifters, push rods,and timming chain.i want to go a bit more then stock. i have a auto tranny that is built with stock converter i want to here some lobe but i don't want it to lose power and i don't want to put in a stall converter just yet. i do have some mods like headers, bbk h pipe,flow master mufflers, 65mm thottle body fuel press reg, k/n air intake. 355 gear.and pullys. help me pick a good set up or just some good info to look at. thanks jeff.. Quote Link to comment Share on other sites More sharing options...
CJINOHIO03 Posted January 14, 2005 Report Share Posted January 14, 2005 well a custom cam or e cam would work but u will need a chip and tuning for a 95 gt... Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted January 14, 2005 Report Share Posted January 14, 2005 if your going to take the time to tear it down and put a cam in it do the ehads at the same time ir it really won't help too much. Quote Link to comment Share on other sites More sharing options...
gt-titan Posted January 14, 2005 Author Report Share Posted January 14, 2005 ok , thanks i was thinking of getting a set of heads , now i think im just going to build this motor i have sitting on the floor then swap them out. i was thinking id do alittle to the motor in the car. i think ill wait. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.