Guest 10secondMouse Posted September 15, 2004 Report Share Posted September 15, 2004 I have a big bearing Ford 9" (3.062) carrier that I want to trade for a GM 8.5 10 bolt rear end, I would prefer it come out of a 75-79 Nova, Ventura or Omega, but ok if its out of a mid to late 70's Firebird or Camaro, or 12 bolts work too. For the project I'm working on a Ford 9" rear is overkill, let me know what ya got. Thanks, Dom Link to comment Share on other sites More sharing options...
Dave1647545494 Posted September 16, 2004 Report Share Posted September 16, 2004 how is the 9inch set up gears brakes coil or leaf springs etc? I have a bolt in axle 8.5 10 bolt(no "c" clips) with richmond 3.73's a heavy duty gm posi and disc brakes its in my skylark right now ("a" body coil spring car) Link to comment Share on other sites More sharing options...
nurkvinny Posted September 16, 2004 Report Share Posted September 16, 2004 Do you have just the center chunk or the whole rearend, including tubes? If you want to sell just the third member, let me know what posi unit is in it, and what gears. I am running very high gears with a 31" tire, and am looking for a spare center section with at least 4.10s to swap in for track trips... thanks Link to comment Share on other sites More sharing options...
Guest 10secondMouse Posted September 17, 2004 Report Share Posted September 17, 2004 Dave, the 9" was set up for a coil spring car, but I got ahead of myself and cut off the brackets with the plasma cutter. As far as the coil spring housing, I gotta pass, I'm really looking for something out of a leaf spring car. NurkVinny, It is a housing and 2.73 open carrier with the large bearing carrier, I had the axles and brakes, but left them at the junk yard for I was going to go aftermarket axles and disc brakes, If still interested let me know. Thanks, Nick Link to comment Share on other sites More sharing options...
Recommended Posts