ridenred27 Posted August 11, 2006 Report Share Posted August 11, 2006 first does any one know what the cfm rating is on the 94-95 mustang gt's are? second car is a 94 306 short block alumnium heads and a powerdyne charger i am having an issue with fan/pulley clearance issues with the fluidyne radiator and stock fan. so i am needing to know what the stock fan cfm is Quote Link to comment Share on other sites More sharing options...
McGraw Posted August 11, 2006 Report Share Posted August 11, 2006 first car 94-95 mustang is around 2800-3200 Flex-a-lite has them for around 4 inch's deep. (13-18 amp draw) (FLex-a-lite model numbers 175/180/185.) Second car still a mustang? You're probably looking at something around the same CFM, unless you wanna go with a bigger hitter, and do like 3300-5500 CFM, same depth little bigger amp draw (12-28.) (Flex-a-lite model numbers 270/280/282/285/290) There is a smaller fan for the second application to that is 2740-4600 CFM, 12-28 amp draw still, and is model number 292/295 and 298. Hope this helps. Quote Link to comment Share on other sites More sharing options...
NTHER91 Posted August 11, 2006 Report Share Posted August 11, 2006 go with 2 smaller fans at each cornor or 2 fans still just ones a pusher and ones a puller ( front and back of rad) Quote Link to comment Share on other sites More sharing options...
Jelloman4571647545499 Posted August 11, 2006 Report Share Posted August 11, 2006 tell Goran to fix the tranny. Quote Link to comment Share on other sites More sharing options...
ridenred27 Posted August 11, 2006 Author Report Share Posted August 11, 2006 tell adam to get a job Quote Link to comment Share on other sites More sharing options...
Nate1647545505 Posted August 11, 2006 Report Share Posted August 11, 2006 tell Clark to stop being a homo Quote Link to comment Share on other sites More sharing options...
MrMeanGreen Posted August 11, 2006 Report Share Posted August 11, 2006 My stock twins are 2850 CFM with both on at 100%. My Zirgo slim-line single is 3200 CFM and is about 4" thinner in width. I have a shorted one here if you'd like to use it for clearance measurements... Quote Link to comment Share on other sites More sharing options...
ridenred27 Posted August 12, 2006 Author Report Share Posted August 12, 2006 ford said that the stock fan is 1700cfm used a flexolite single that fits near perfect and is 3200 or 3300 cfm. thanks for the info you all and thanks for the offer antony Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.