where to buy carrier bearings?

[Guest 1sweet3.4]

Last time i posted all of you dsmers were nice enough to leave me hangin, but i figd. out on my own. tranny vibration and noise isn't tranny vibration or noise at all. driveshaft is vibrating so i'm rebuilding. first off, is there a difference b/n talon/eclipse/laser driveshafts? I can get through my work the u joints for the talon, but the others aren't listed. im assuming this is error in catalogs.

Second, i can't get the carrier bearings through work, so does anyone have ideas on where to find this? I'd like to get it done before the 16g in my bedroom gets the better of me and I bolt it on. Also, anyone know what the internal wastegate on a 16g is set at?

[Dave1647545494]

napa should have what you want or international auto parts....

 

if the driveshaft is the problem send it down to columbus joint and clutch and have it balanced you should have this doen anytime you change a u-joint

[Guest B series]

Just bolt on the 16g, spin that driveshaft fast enough and it will balance out:burn:

[90_EAGLE_TALON]

Hey Edwin ill check around at work to see if I can find out about what that wastegate is set at.

[90_EAGLE_TALON]

Hey Edwin the book here says that if it is a 7cm housing it is 10 PSI if it is a 10cm housing then it is 17 PSI. Hope this helps you out! Catch you later! By the way my talon is at the apartment again and I think I will be getting the A1 head stud set to fix it with but ill let you know for sure later.