Jump to content

Twin Turbo Cobra, Sprayed LSX's, Supercharged Notch and other


ICEMAN1647545504

Recommended Posts

http://media.putfile.com/Diamond-Head/wide

I saw this one on svtperformance.com and I dont think it has been posted here... not a bad video...

 

DESCRIPTION FROM SVT PERFORMANCE.COM

 

First race is 98 Z28 (the car with the HID's), Forged 347, AFR 205's, decent sized cam, Fast 90/90, Rossler TH350, 3.73's, Hoosier QTP's, Full Suspension vs a LS1 Formula with Heads, Cam, 6 Speed, 9 Inch, etc

 

Second race is the same 98 Z28 vs a an LS1 Z28 with a 383, Ported LS6 Heads, some cam, TH350, ET Streets or something and they VHT'd their lane. He also has a direct port kit on the car but agreed not to spray.

 

Third race is SNAFU in the HP Twin T57 03 Cobra, it was making about 16 psi that night, Sulivan Intake, Pump Gas, Hoosier DR's vs Mustang LX Saleen Clone, Vortech S Trim, 347, etc etc, car did like 585 rwhp at Panhandle

 

The first incar race is the same Cobra vs 97 Formula with Lloyd Elliot Heads & Cam, 75 Shot, 4.10's

 

The second and third incar races are the same Cobra vs 93 Notch, Vortech T Trim @ 18 PSI, NX 100 Shot, 347, C4, 3.73's, 325 MT Radials. First race the Cobra gets a big jump, Notch catches up, Cobra misses fourth, second race, same thing, the notch gets ahead and Cobra misses fourth. Notch has been 9.2's@147 on that setup before and similar et with alot more MPH on more nitrous.

 

The next race is the 98 Z28 from above vs the 383 Z28 again, we think the Z28 sprayed that pass, he was getting pulled, car got louder and came right by us. The no VHT comment from the 98 Z28 driver is from where they VHT'd their lane earlier in the night hahah

 

Race after that is the same 98 Z28, same 383 Z28 and an RX7 with an LS1 with Home Ported 5.3 Heads, some 224 Cam (not the TR224 Cam), LS6 Intake, some kind of dr's or something too I think

 

Next two races are the 98 Z28 vs the LS1 RX7, from a 40, then a lowww roll

 

Races after that is the 98 Z28 vs 03 Cobra with a Whipple at 15 psi, 560 rwhp from a roll and then from a stop

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...