Jump to content

Key fob programming


Buck531

Recommended Posts

Anyone have instruction on how to program a keyfob for a 95 Regal? The stealership wants the minimum of $40 and a max of $80. Not worth it for the beater car.

 

I've tried changing the batteries in both fobs.. nada. It worked a few years ago, but then slowly stopped working.

 

I did find instructions, but they were for 96+ Buicks.. they're a little different.

Link to comment
Share on other sites

Open rear compartment lid and position carpet (next to the antenna) aside.

 

Access the program wire terminal.

 

Using a jumper wire with alligator clips, ground the wire terminal to the antenna.

 

The door locks will automatically lock and unlock, indicating that the receiver is in the programming mode.

 

Important

Any transmitter that was previously matched has been erased.

 

With the system still grounded, press any button on the transmitter.

The door locks will automatically lock and unlock, indicating that the transmitter code has been set. if coding a second transmitter, repeat step 4. Important

 

Removing the jumper wire before the second transmitter is programmed will prevent the transmitters from being matched. if this mistake is made and you wish to program a second transmitter, unground wire and repeat steps 3, 4 and 5.

Remove jumper wire.

The system will not operate if the jumper wire is not removed.

Verify operation of the transmitter(s).

Properly position the carpet.

Link to comment
Share on other sites

Well shit, didn't work. I mean.. the stuff unlocked/locked like it said when I grounded it, but when I hit a button the fob it didnt do shit. I even ran to radio shack and got some expensive ass batteries :(. I'm going to grab one off of ebay.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...