Farkas Posted February 21, 2007 Report Share Posted February 21, 2007 http://www.aptfast.com/Images_Parts/Weber_Carburetors/DCOE_Chokes.jpg Well, I'm dialing in my jets and etc for my carbs and my estimated power band will require me to run 38mm choke tubes as opposed to the 36mm stock ones. Apparently online a guide says I can run choke tubes up to 40mm on my Weber 45's but I can't source anything bigger than the 36's I already have. What I need is to find a legitimate shop that can bore out my 36mm choke tubes to 38mm. I'm sure there are plenty of people that could do it, but I want it done by people with the right tools.. any suggestions? *Edited in picture so you have an idea what I'm talking about Quote Link to comment Share on other sites More sharing options...
AJ Posted February 21, 2007 Report Share Posted February 21, 2007 2mm is not very much, it may take some time but why not get a brake hone and a drill and do it your self? there not hard to use and next to imposible to mess up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.