90_EAGLE_TALON Posted February 28, 2007 Report Share Posted February 28, 2007 This car has a rebuilt engine in it and it ran fine for 700 miles. Now it is missing under normal or hard acceleration. If you accelerate lightly it runs smooth. Any ideas? This car is a 1990 Eagle Talon N/A and only has the balance shafts removed with an eliminator kit and a K&N filter. Quote Link to comment Share on other sites More sharing options...
Farkas Posted February 28, 2007 Report Share Posted February 28, 2007 That's not normal operation? Quote Link to comment Share on other sites More sharing options...
verse Posted February 28, 2007 Report Share Posted February 28, 2007 My first thought process would be to make sure the plugs are at the gapped to spec., and measure the resistence of the spark plug wires to see if they are well within spec. Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted February 28, 2007 Report Share Posted February 28, 2007 Coil, Or Injector Or The Ecu Quote Link to comment Share on other sites More sharing options...
s13 Posted February 28, 2007 Report Share Posted February 28, 2007 Spark plugs. Quote Link to comment Share on other sites More sharing options...
90_EAGLE_TALON Posted February 28, 2007 Author Report Share Posted February 28, 2007 spark plug were changed the day before it started missing so ill start by rechecking the gap. (NGK iridiums) I also will probably pull the ECU out and check to see if there is anything visibly wrong with it. Quote Link to comment Share on other sites More sharing options...
Farkas Posted March 1, 2007 Report Share Posted March 1, 2007 I was teasin' btw Quote Link to comment Share on other sites More sharing options...
HAOLE Posted March 1, 2007 Report Share Posted March 1, 2007 spark plug were changed the day before it started missing so ill start by rechecking the gap. (NGK iridiums) I also will probably pull the ECU out and check to see if there is anything visibly wrong with it. Did you get the right heat range? Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted March 1, 2007 Report Share Posted March 1, 2007 spark plug were changed the day before it started missing so ill start by rechecking the gap. (NGK iridiums) I also will probably pull the ECU out and check to see if there is anything visibly wrong with it. the drivers in those suck, i dont think you'll be able too see it without a lab scope. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.