1Quik7 Posted June 11, 2007 Report Share Posted June 11, 2007 First off, NO TRADES! please do not offer your Emu Farm + cash, i am not intersted! Second, as of now i really don't want the hassle of parting the car out, so don't ask if you can have just this or that off the car! And Third, no low-ballers please, this car has a lot of money in it, if you think it's an unfair price, let me hear your opinions...don't say i'll give you 5k and a cheeseburger, man! anyways, I decided to try and sell my car, it was in a fender bender last February, and i've been kicking it around for a while now, thinking about getting another shell and transferring everything over...but i think i might just see what i can get for it and go a different route. the car was in a 15mph crash on the passenger side, after the rear-end got a little squirrely...since i removed the front bumper support the damage was a little more severe than should've been...but almost all the parts are still in excellent condition. i'm selling this as a parts car, if you think you can fix then go for it, i'd assume that the body would need quite a bit more work than most people would be willing to do, plus the car doesn't run as it sits now. the car itself has 70k-ish miles on it, the Odometer light went out a while ago, but the car was only driven on the weekends....and sadly, this car was babied....Zavier and Jason at the RX7 Store can vouch for that. all parts should have less than 10k miles on them...all work was done by them. here's a list of parts included on the car: RX7 Store Large Full Bridgeported Motor < 10k miles good compression T51R Kai Turbo Kit Competition Fuel Rail Aeromotive FPR FPR Guage 1600x2 Primary - 1000x2 Secondary Injectors Aeromotive A1000 pump 16gal Jaz Fuel Cell Full Stainless Lines/Earl's Fittings Defi Fuel Pressure Guage Defi Boost Guage GReddy 3-row Intercooler (some minor damage) Polished GReddy Elbow GReddy Type R BOV HKS-R Titanuim Turbo Back Exhaust Polished UIM/LIM Polished U/D Pulleys Pettit AST Fluidyne Radiator (slighty damaged, might be salvaged) SPEC 4 Puck Clutch Featherlite Flywheel Diff. Bar (pretty sure i have one of those, though it's been a while) Slotted/Drilled Rotors Hawk HP Pads Apexi Power FC (tuned for 17psi I believe) HKS EVC V Boost Controller Defi Turbo Timer/HUD HKS TwinPower/harness HKS DRAG II Coilover Suspension Front Sway Bar Rare M2 Rear Strut Tower Bar w/harness bungs Sparco Red Racing Seats w/sliders 5Pt. Safety Harnesses Pettit Rear Flares Forgeline Custom 18x12.5 Rear 18x9.5 Fronts MIchellin Sport 335/30's Rear 265/45's Front (Excellent Tread) Cheapass CD Player Awesome GT-Style Aluminum Wing (adds 10hp) Mazdaspeed Shift Knob (another 5hp) that's the majority of the parts, i might have missed a couple things, but those are the 'major' upgrades. i'll link a couple pics below: Original Post: http://www.rx7club.com/showthread.php?p=7032588#post7032588 http://s203.photobucket.com/albums/a...Picture001.jpg -shows the minor damage to the intercooler, and a little bend in the piping. you can also see the damage done to the body on the passenger side http://s203.photobucket.com/albums/a...Picture003.jpg -shows the radiator, and the creasing in the top...probably could be salvaged? shows the damage to the front right panel: http://www.rx7club.com/attachment.php?attachmentid=242457&d=1181602918 shows damage underneath panel: http://www.rx7club.com/attachment.php?attachmentid=242460&d=1181602918 further corner damage: http://www.rx7club.com/attachment.php?attachmentid=242456&d=1181602918 picture of the engine bay: http://www.rx7club.com/attachment.php?attachmentid=242458&d=1181602918 please be aware that this car was a project that was underway....the interior isn't finished, but i don't expect this car to be driven, i expect it to be parted out or swapped to another FD... if someone parted this out themselves i imagine they could make an easy 4-5k profit. all in all, the parts are in ecellent condition, the body....not so much, but hey, get a shell! i've spent thousands and thousands of dollars on this car, and it hurts me somewhat to let it go....but if i don't do it now....it will probably just sit in my garage for years to come. Anyone interested? Link to comment Share on other sites More sharing options...
Guest Rice Box Posted June 12, 2007 Report Share Posted June 12, 2007 if u do end up parting it id like some interior parts and the shell Link to comment Share on other sites More sharing options...
s13 Posted June 12, 2007 Report Share Posted June 12, 2007 Pictures done work, and the links didn't work for me either. Link to comment Share on other sites More sharing options...
TheHaze Posted June 12, 2007 Report Share Posted June 12, 2007 http://i203.photobucket.com/albums/aa15/1Quik7/Picture003.jpg http://i203.photobucket.com/albums/aa15/1Quik7/Picture004.jpg http://i203.photobucket.com/albums/aa15/1Quik7/Picture001.jpg Link to comment Share on other sites More sharing options...
Recommended Posts