Stimmel1647545512 Posted July 25, 2007 Report Share Posted July 25, 2007 I am looking for a throttle body spacer that is also an nitrous plate, not saying my car has nos (cough cough) but i am in the market for the plate for um a friend yea thats it.. Thanks, Andy Link to comment Share on other sites More sharing options...
Guest Removed Posted July 25, 2007 Report Share Posted July 25, 2007 get the big shot plate...better distribution...trust me.1 and 8 like too run lean with single nozzle or the TB plates. Link to comment Share on other sites More sharing options...
Stimmel1647545512 Posted July 25, 2007 Author Report Share Posted July 25, 2007 You talking about the intake spacer plate? that goes in between the upper and lower? never thought of that they are rather pricey arent they but that would like nice and provide some heat resistance upper to lower, I will look into it. Link to comment Share on other sites More sharing options...
Guest Removed Posted July 25, 2007 Report Share Posted July 25, 2007 i seen one on ebay go for 275 or so, it was only missing the main hose and bottle. had extra jets and all.or just plum a fogger in the upper(been there done that) right above the gasket area. Link to comment Share on other sites More sharing options...
Stimmel1647545512 Posted July 25, 2007 Author Report Share Posted July 25, 2007 I have a nos kit laying around, I mean my friend has one laying around (cough cough) and it was the standard efi kit that plummed into the tb or the intake elbow. Link to comment Share on other sites More sharing options...
Guest Removed Posted July 25, 2007 Report Share Posted July 25, 2007 that would work great, but on larger shot's , they seem too lean out on the end cylinders. 1 & 8. keep it under 180 and you should be fine.(yeah, i was spraying a stone stock 5.0 that same way, i didnt have issue's until i stepped up too 200 plus level. Link to comment Share on other sites More sharing options...
Recommended Posts