Stimmel1647545512 Posted October 18, 2007 Report Share Posted October 18, 2007 Where is my best bet to replace a tranny line in my neighbors 95 taurus 3.0, I am thinking just go to the junk yard and find a clean one any other ideas? It the one from the radiator that swoops down, goes along the bottom of the core support, and turns into soft line on the driver side and heads back to the tranny i think.... Link to comment Share on other sites More sharing options...
Dave1647545494 Posted October 18, 2007 Report Share Posted October 18, 2007 its either 5/16 or 3/8 just make it out of steel line from the autoparts store or run it all in rubber tranny hose make sure you get tranny hose and not fuel hose its different Link to comment Share on other sites More sharing options...
Stimmel1647545512 Posted October 18, 2007 Author Report Share Posted October 18, 2007 So just cut the hard metal parts nice and flush and cover it with some tranny tubing and hose clamp it on there or what? Link to comment Share on other sites More sharing options...
TurboRust Posted October 19, 2007 Report Share Posted October 19, 2007 yep use some wire loom if it looks like it'll rub on something. Link to comment Share on other sites More sharing options...
Stimmel1647545512 Posted October 19, 2007 Author Report Share Posted October 19, 2007 Right on, I guess ill go that route just wanted to double check, Derek and Dave I will be in touch about meeting up with you guys about that rear end. Thanks Guys Link to comment Share on other sites More sharing options...
Recommended Posts