tristanlee85 Posted February 3, 2008 Report Share Posted February 3, 2008 Just a shot in the dark... I'm looking to sell this all as one kit so keep that in mind. This will fit any 92 - 98 DOHC SC, SL, or SW. It will also work with 99 - 02 models only if the head is/was swapped to a 92 - 98 DOHC (5-bolt) head. Borg Warner / KKK K26#8 turbo (.50/.73ar) [compressor map]Audi external wastegate (9psi)2.5" downpipe w/ header wrap and Moroso Spiralflow muffler (v-band)91 - 98 DOHC manifold w/ header wrap (1.5" ID schedule 40 piping)92 - 02 transmission (your choice of MP2, MP3, or MP3 with MP2 5th) with welded differential pinFlywheel that has been freshly turned with no useLuk 6-puck sprung clutch - held (3) 17psi runs and a 22psi+ run and 9psi for over a year and a half with no slipping) Depending on the interest, I may include the IC piping, intercooler, and blow-off valve. With the intercooler and piping included, I'm looking to get $1000. I made 262whp with this kit at 5300 before the boost fell off back to 12psi. The turbo is solid and isn't even close to being out of its range. For a high-boost setup, the BOV will need to be modified to hold more pressure. It's a DSM blow-off valve and with modification, it's capable of holding well over 25psi. If you need pictures of anything more detailed, let me know. It's a very solid setup and has done me well. While it isn't a pretty stainless steel setup, its functionality is great. The piping isn't thin so it isn't going to break. The welds are solid. The only downfall I foresee is using this for a low boost setup such as 5psi. The turbine is large and it's capable of making a good amount of power so low boost will be out of the efficiency range. Also, I have a MegaSquirt with 42 lb/hr injectors. This can go with the kit or separately. I'm willing to meet up to deliver the setup or ship it out. Shipping will be cheap so don't worry about the price. For pictures, click here. Link to comment Share on other sites More sharing options...
Rally Pat Posted February 3, 2008 Report Share Posted February 3, 2008 Tristan, how much for the MS? Link to comment Share on other sites More sharing options...
tristanlee85 Posted February 3, 2008 Author Report Share Posted February 3, 2008 It's brand new. If you want the MS1 w/ extra code, I'll let it go for $260. Comes with a wiring harness. If you want the MS2 processor and harness, make it $310. Link to comment Share on other sites More sharing options...
undr_psi Posted February 3, 2008 Report Share Posted February 3, 2008 why are you doing said parting out of plastik race car??? Link to comment Share on other sites More sharing options...
tristanlee85 Posted February 3, 2008 Author Report Share Posted February 3, 2008 Why hasn't your mom called me back??? It's time for a better round of products this time. No one builds an engine to be under 300hp. Link to comment Share on other sites More sharing options...
boosted98gst Posted February 3, 2008 Report Share Posted February 3, 2008 wow man, I give you props with the car being org, not many people expect a saturn come up net to you with 260hp, good luck with the sale and whatever your building next............BTW are you still doing the saturn up? Link to comment Share on other sites More sharing options...
tristanlee85 Posted February 4, 2008 Author Report Share Posted February 4, 2008 It'll still be there car. Going up to 3" exhaust, 2.5" IC piping, wild cams, T04b, LS1 throttle body, 3" intake, IC/radiator combo, and more crap. http://www.thegoldentoilet.net/gallery/content/99_Images/04_Turbo%20Setup%202/000intakemanifold.jpg http://www.thegoldentoilet.net/gallery/content/99_Images/07_For%20Sale/IMG_0371.jpg Link to comment Share on other sites More sharing options...
Rally Pat Posted February 4, 2008 Report Share Posted February 4, 2008 Tristan, your price includes those injectors, right? Link to comment Share on other sites More sharing options...
tristanlee85 Posted February 4, 2008 Author Report Share Posted February 4, 2008 I can't do that. These MegaSquirts are brand new. That price is what it would cost to assemble a MS and get a wiring harness. Link to comment Share on other sites More sharing options...
Rally Pat Posted February 4, 2008 Report Share Posted February 4, 2008 Willing to sell without the harness? Link to comment Share on other sites More sharing options...
AJ Posted February 4, 2008 Report Share Posted February 4, 2008 damn man do you work for kleenex? them welds are boogered up lol Link to comment Share on other sites More sharing options...
tristanlee85 Posted February 4, 2008 Author Report Share Posted February 4, 2008 Willing to sell without the harness? Sorry. I don't need a harness laying around. damn man do you work for kleenex? them welds are boogered up lol I'll take functionality over looks any day. Link to comment Share on other sites More sharing options...
AJ Posted February 4, 2008 Report Share Posted February 4, 2008 I'll take functionality over looks any day. but your car doesn't function. and you can have your cake and eat it too. just takes skill. Link to comment Share on other sites More sharing options...
tristanlee85 Posted February 4, 2008 Author Report Share Posted February 4, 2008 You're right. I should have bought a car where I can get all my parts from Jegs. Link to comment Share on other sites More sharing options...
AJ Posted February 4, 2008 Report Share Posted February 4, 2008 i have to withdraw from this tread because of a text message asking me to quit picking on you. Link to comment Share on other sites More sharing options...
tristanlee85 Posted February 4, 2008 Author Report Share Posted February 4, 2008 Haha. When she walked in the door I asked if you two had been arguing because all you were doing is dogging what I had to offer. Link to comment Share on other sites More sharing options...
Miller Posted February 4, 2008 Report Share Posted February 4, 2008 r u a gurl? Link to comment Share on other sites More sharing options...
tristanlee85 Posted February 4, 2008 Author Report Share Posted February 4, 2008 Yes. I have a big gaping vagina. Link to comment Share on other sites More sharing options...
Recommended Posts