mitcholi6792 Posted February 28, 2008 Report Share Posted February 28, 2008 i have a 67 camaro and i need to fix the front suspension and swap out for disc brakes. Will a s10 front end work? help appreciated Quote Link to comment Share on other sites More sharing options...
AJ Posted February 28, 2008 Report Share Posted February 28, 2008 no, an S10 is the same as a G-body. what are you going for with the car? if all you want is disk brakes then you can do this, http://www.speedtech-performance.com/index.cfm/page/ptype=product/product_id=51/category_id=217/home_id=123/mode=prod/prd51.htm then you have C5 brakes on the front of your car, you can also get cross drilled rotors from GM pretty cheep. if you have any questions on first gen camaros you can PM me. Quote Link to comment Share on other sites More sharing options...
mitcholi6792 Posted February 28, 2008 Author Report Share Posted February 28, 2008 well i want to just get it handling decent and some power. my front suspension is shot and i just want to replace everything and improve it. and thx Quote Link to comment Share on other sites More sharing options...
AJ Posted February 28, 2008 Report Share Posted February 28, 2008 just put poly bushings in it and good shocks. you've been on here long enough you have seen the beast i built. bet your self a good set of new 2 inch lowering springs for the front and rear. what you want to do is put rubber bushings in the front of the leaft speings and poly in the rear. with the new bushings in the front you can tighten the car up pretty good. also install solid body mounts as that will make a huge difference. Quote Link to comment Share on other sites More sharing options...
BDHG940 Posted February 28, 2008 Report Share Posted February 28, 2008 If you need hooked up on a complete disc conversion and 2" drop spindles, I can get you taken care of. Power or non power let me know, pm me Quote Link to comment Share on other sites More sharing options...
AJ Posted February 28, 2008 Report Share Posted February 28, 2008 stay away from drop spindles if you want it to handle at all. Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted February 28, 2008 Report Share Posted February 28, 2008 stay away from drop spindles if you want it to handle at all. plus 1 or just go all out and buy tubular a arms. Quote Link to comment Share on other sites More sharing options...
BDHG940 Posted March 6, 2008 Report Share Posted March 6, 2008 we have standard ride height setups as well if you need brakes Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted March 7, 2008 Report Share Posted March 7, 2008 hotchkis and air ride both make a nice setup for that car Quote Link to comment Share on other sites More sharing options...
AJ Posted March 7, 2008 Report Share Posted March 7, 2008 so does Detroit Speed and Engineering Quote Link to comment Share on other sites More sharing options...
lawnman Posted March 7, 2008 Report Share Posted March 7, 2008 Listen to AJ , his camaro outhandled new Vettes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.