Jump to content

my skyline r33 gts-t arrived


boosted98gst

Recommended Posts

welp only half the car made it back to ohio lol, this is my spare set up thats going to be built, if anyone needs any imported engines/trannys or full front clips, I can get anything you want, with warrenty cheaper then anyone in ohio, my friend edward owns r&d is california and isthe largest jdm importer in the lower 48, you get video of the car running in japan before being cut, and leak down and compression numbers, this motor is alittle highmile at 102kilo, but leakdown test was 97% across the board. I checked out under the vavle cover and oil looks like honey with no gunk build up ect, very nice motor.

 

 

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture135.jpg

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture152.jpg

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture153.jpg

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture154.jpg

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture134.jpg

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture133.jpg

 

 

started to strip out the clip

 

 

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture169.jpg

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture168.jpg

http://i55.photobucket.com/albums/g127/boosted98gst1998/Picture167.jpg

Link to comment
Share on other sites

yeah I get the things so cheap I just get the whole front half, its a much better way then putting everything together, that way I knew the engine ran ect, it was able to start right up, before i pulled the harness. plus you get more goodies that you can sell, the brakes, 5 lug, swaybars, cluster, ect I pay less for the clip then people do on motor sets.
Link to comment
Share on other sites

what are you doing with that?

 

 

im tired of 4 cly big turbo cars, tired of the lag and lack of tq ect, now I see why supra guys love the inline six, I know this is no v8 but makes more power then alot of them stock for stock, and with simple turbo upgrade and fuel, people in aus and japan have taken these motors 600 hp on stock internals with ease, this one is going to be built, and my other rb is my weekend car, while this engine is going to m&m, its not going to be hard to push a 240 coupe xe base 2600 lbs down the road. guys with this swap are running low 12's just with basic mods. now its time for huge turbo inline 6 in FR light weight car.

Link to comment
Share on other sites

im tired of 4 cly big turbo cars, tired of the lag and lack of tq ect, now I see why supra guys love the inline six, I know this is no v8 but makes more power then alot of them stock for stock, and with simple turbo upgrade and fuel, people in aus and japan have taken these motors 600 hp on stock internals with ease, this one is going to be built, and my other rb is my weekend car, while this engine is going to m&m, its not going to be hard to push a 240 coupe xe base 2600 lbs down the road. guys with this swap are running low 12's just with basic mods. now its time for huge turbo inline 6 in FR light weight car.

 

+1

Link to comment
Share on other sites

did they take it off the truck for you? Forklift or something? Looks like that would be a PITA to move...

 

 

thats my dads semi, he helps me out, whenever I need some parts from the california store, I call him and he stops out there and they load what I need on the top deck,, because he hardley uses it. But I used a tow truck wench to get it off the top deck, wraped the clip with a chain and cliped it and pulled it right off.]

 

 

Today 10:37 AM

BIGGU looks good man, you still got that soarer R154?

 

 

yes I still have the soarer R154 in my basement.

 

 

Today 11:45 AM

GRN96WS6 We just sold a few of those for export only at the auction I was supporting in Miami last week. We even had a few of the engines also for export only.

 

 

I wonder where the engines went? maybe around the carribean, they are really into skyline stuff.

Link to comment
Share on other sites

thanks TJ for helping me and my dad out for a second to get that shell off the motor!

 

Anytime. I am going to have to hit you up on some Japan parts here pretty soon and see what kind of stuff I can get.

Link to comment
Share on other sites

thats my dads semi, he helps me out, whenever I need some parts from the california store, I call him and he stops out there and they load what I need on the top deck,, because he hardley uses it. But I used a tow truck wench to get it off the top deck, wraped the clip with a chain and cliped it and pulled it right off.]

 

 

Today 10:37 AM

BIGGU looks good man, you still got that soarer R154?

 

 

yes I still have the soarer R154 in my basement.

 

 

Today 11:45 AM

GRN96WS6 We just sold a few of those for export only at the auction I was supporting in Miami last week. We even had a few of the engines also for export only.

 

 

I wonder where the engines went? maybe around the carribean, they are really into skyline stuff.

 

damn, those are some nice connections right there...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...