88lx5oh Posted September 8, 2008 Report Share Posted September 8, 2008 ok im starting to wire up the nitrous, and im kinda stumped.. on the wiring of my window switch. i am hooking everythgin up like normal, with a micro throttle switch, but im also going to be using the window swicth.. so foot down nitrous on only between the RPM range set by the window switch. foot off the gas kit not functional. where inline does the window swicth go??? on the wiring of the MSD window switch it reads as such YELLOW Normally Opened. This wire will provide a ground source at your desired On rpm, and remove the ground at the set Off rpm. so in theory i run the kit wired as normal with the micro throttle switch, but instead of just grounding the solenoids to the body.. i would ground them through the yellow wire on the MSD window switch... does this sound right?? Quote Link to comment Share on other sites More sharing options...
68camaro Posted September 8, 2008 Report Share Posted September 8, 2008 that is right...... Quote Link to comment Share on other sites More sharing options...
flippy1974 Posted September 9, 2008 Report Share Posted September 9, 2008 that is right...... x2 Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted September 9, 2008 Report Share Posted September 9, 2008 X3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.