Comitatus Posted October 21, 2008 Report Share Posted October 21, 2008 A seal let go in my motor, and my luck, pride, and wallet can no longer handle it. So I'm sad to say, that I'm parting out my beloved machine. This car recently tuned on low boost made 369whp @ 14psi on a DynoDynamics dyno. That is about 435whp on a dynojet. The best 1/4 mile time I ran in this car was a 12.0 @ 120.93mph. That was last year on a different tune and 12psi. This year my first pass in the car netted a 12.4 @ 122mph which boost gauge read 13psi, launching easy/ 2.4 sec 60'. I know this car had a high 11 second pass @ 123-124 mph on low boost/street tires. I have owned this car for almost 5 years. I bought the car with 109K miles on the odometer. It now has just over 112k miles. The motor was freshly built on 8/10/08. I put about 700 miles on this motor before the seal went. Clean title. Registered in Ohio. I have a HUGE list of parts that are on this car. I'll do my best to take pictures of everything, so please be patient if I don't have one up right away. All of these parts are either new, like new, or have a very small amount of mileage on them. I'm pricing everything to sell because I want this stuff gone. My loss is your gain. I'd like to sell the big stuff locally to stay away from shipping, but I will ship items at the buyer's expense. I can do Paypal, but buyer will need to add 4% to the total cost to cover fees. Prices listed in RED, and does not include shipping. If you want to buy multiple things, I'm willing to wheel and deal. Located in Cincinnati, OH 45241. Engine Motor is torn down currently. Selling complete shortblock AS IS with following parts (last rebuild)- $1,500 • S5 TII FC3S ShortBlock • Half Bridgeport Irons by BDC Motorsports • Ported Rotor Housings by BDC Motorsports • Atkins 2mm Apex Seals • OEM Mazda 2mm Apex Seal Springs • Mazda OEM “O-ring kit” • New OEM Oil Pump Chain • New OEM Stationary (main) Gear Bearings • New OEM Rotor Bearings • New OEM Side Seals and FD Springs • New OEM Thrust Bearings • New OEM Oil Control Ring Springs Kit • Solid Corner Seals and Competition “Race” Springs • Later/Thicker Cast Dowel Land Rear S5TII Plate • New OEM Front Plate (Thick Dowel Land) • New OEM Dowel Pins • FD Oil Pressure Regulator • Racing Beat Oil Pan Baffle Plate • New Water Pump & OEM T-Stat • Banzai Racing Oil Pan Brace & Stud Kit - $110 • Mazdatrix Oil Filter Pedestal - SOLD • Powder Coated FD UIM and Polished TB - $375 includes S5 LIM, spacer, and hardware • Custom Port Matched FD UIM to FC LIM Spacer • Modified Greddy TB Elbow - $80 • Mazda Racing Competition Pulley Set - $175 - Has Rare Earth Magnets in Crank Pulley • New FD Alternator - $100 - Pending Sale • Banzai Racing Polyurethane Motor Mounts - $100 Transmission • ACT HD Pressure Plate - SOLD • ACT 6 Puck Un-sprung Clutch Disc - SOLD • ACT StreetLite Flywheel - $210 • Banzai Racing Polyurethane Transmission Mounts - $35 Cooling • Koyo Aluminum Radiator - $300 • Black Magic Extreme E-fan - $275 • Samco Sport Coolant Hoses - $90 • Racing Beat Stainless Braided Oil Cooler Lines - SOLD • Yonaka 26x12x3 Core Intercooler $275 • 4” Turbo Intake Pipe - $30 • K&N Cone Filter - $30 - 4" filter • Custom IC Piping - 2.5” Turbo side & 3” Intake side - Powder Coated - $175 Exhaust • Linder Power Systems Custom Divided Manifold (Ceramic Coated) - $800 • Dual SS EGT bungs (1 per Runner) • Linder Power Systems Custom 3" to 3.5” Downpipe (Ceramic Coated) - $300 • Dual Tial 38mm Wastegates - 11.5psi springs - $200 per WG • Custom 3.5” Stainless Steel Single Exit Exhaust - $800 • Borla XR-1 Oval mid-muffler • Magnaflow Race Series rear muffler Turbo • Polished Garrett T04R w/ P-trim Exhaust Wheel - $700 • Divided 1.32 A/R Exhaust Housing (HPC Coated) • 3” V-band Exit • -4AN Stainless Braided Oil Feed -$100 for both feed/drain lines w/ flanges. • -12AN Stainless Braided Oil Drain • Gotham Racing Turbo Blanket - $125 Fuel Fuel Kit (no injectors or pump) - SOLD • KG Parts FC Fuel Rails - SOLD • Aeromotive 10 Micron Fuel Filter - SOLD • Aeromotive A1000 FPR - SOLD • Marren Fuel Pulsation Damper - SOLD • -6AN Stainless Braided Lines w/ Earl’s Aluminum Fittings (fuel filter forward) - SOLD • 2 x 720cc Siemen Deka Injectors - $120 - Pending Sale • 2 x 1680cc Bosch Injectors - $150 Ignition • BMEP IGN-1A Coils - $320 including custom Magnecor wires • Custom Magnecor R100 10mm Plug Wires • NGK R6725-105’s - $80 Excellent Condition Electronics • Haltech S3 Hall Effect Sensor - $200 includes custom bracket • Custom Hall Effect Sensor Mounting Bracket by Ludwig Motorsports • Turbosmart E-boost 2 60psi Boost Controller w/ twin LED ring - $450 including dual solenoids and LED ring • Dual E-boost Solenoids (1 per WG) • Innovate Motorsports LC-1 Wideband - $340 - Includes XD-16 Air/Fuel Guage • Innovate Motorsports XD-16 Air/Fuel Gauge • Optima Red Top Battery - $80 • Greddy Turbo Timer - $90 • Greddy FC RX7 Turbo Timer Harness - $10 Suspension • Energy Suspension Full Bushing Set - Black - $100/Brand new, still in Box Brakes • Brembo Blank Rotors – Slotted, Dimpled & Zinc Coated - $200 for front and rear • Hawk HPS Brake Pads - $75 F/R • Mazdatrix Stainless Steel Brake Lines - $70 Gauges • Defi Link Meter 60mm Oil Pressure - $200 • Defi Link Meter 60mm Exhaust Gas Temperature - $200 • Defi Link Meter 52mm Fuel Pressure - $190 • Defi Link Meter 52mm Oil Temperature - $150 • Defi Link Meter 52mm Water Temperature - $150 • Defi Link Meter 80mm Tachometer w/ Link Indicator Light - $150 • Defi Control Unit II - $100 Interior • Corbeau FX1 Pro Seat - $200 • Corbeau 3” 5 Point Cam-Lock Harness - $120 • AutoPower 4 point Roll Bar w/ Diagonal Brace & Harness Bar - $400 - Pick up Only • AutoVation Aluminum FC3S Pedals - $75 • Voodoo Racing Shift Knob - $30 • Speed Machine Performance Carbon Fiber Radio Surround - $100 • Speed Machine Performance Carbon Fiber Dual Gauge Pod - $150 Miscellaneous • Tial 50mm BOV - $200 • Remote Terminals Installed in Engine Bay - $15 • Jazz Vented Oil Breather - $60 • Jazz Recirculating Coolant Overflow - $20 Exterior • ShineAutoProject Carbon Fiber Sexy Style Vented Hood - $650 • Sparco Polished Aluminum Hood Pins - $35 Brand New - Still in Package Alcohol Injection • Custom Progressive Alkycontrol.com kit - $650 - will include 4 gallons of methanol • Twin M10 nozzles • 1 gallon JAZZ fuel cell - modified for pure alcohol • Pump modified for pure alcohol • SS braided lines • PAC controller • Check Valve • Low Level LED and Injection Indicator LED http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0160.jpg http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0161.jpg http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0166.jpg http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0167.jpg http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0040-2.jpg http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0035-3.jpg http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0036-5.jpg http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0036-2.jpg Link to comment Share on other sites More sharing options...
Comitatus Posted October 22, 2008 Author Report Share Posted October 22, 2008 Haltech and Supra Pump - Pending Sale Greddy TT harness and CAS Cover - Pending Sale 720cc Injectors - Pending Sale Link to comment Share on other sites More sharing options...
cremean Posted October 22, 2008 Report Share Posted October 22, 2008 Willing to part the headlights from the shell? Link to comment Share on other sites More sharing options...
Comitatus Posted October 22, 2008 Author Report Share Posted October 22, 2008 Willing to part the headlights from the shell? Shouldn't be a problem. They are PIAA 510 SMR's. Only have been on the car for 3 months, and not much use. Are you looking for just the driving lamps? Link to comment Share on other sites More sharing options...
cremean Posted October 22, 2008 Report Share Posted October 22, 2008 Actually, I want the housings and everything. Was thinking I would like to replace the flip-ups on my car. Link to comment Share on other sites More sharing options...
Comitatus Posted October 22, 2008 Author Report Share Posted October 22, 2008 Actually, I want the housings and everything. Was thinking I would like to replace the flip-ups on my car. I gotcha. Unfortunately, the housings are a part of the bumper. RE-Amemiya FC2000 is the name. Link to comment Share on other sites More sharing options...
cremean Posted October 22, 2008 Report Share Posted October 22, 2008 Damn, oh well. Thanks! Link to comment Share on other sites More sharing options...
Comitatus Posted October 23, 2008 Author Report Share Posted October 23, 2008 CAS Cover - Sold Haltech - Sold Supra Pump - Sold Gretty TT FC RX7 Harness - Back up for sale Link to comment Share on other sites More sharing options...
RX-7 Addict Posted October 23, 2008 Report Share Posted October 23, 2008 Interested in the turbo blanket, also I could use the 4 gals of meth. PM sent. Link to comment Share on other sites More sharing options...
Smokey Posted October 23, 2008 Report Share Posted October 23, 2008 Thought I'd let you know that PayPal raised their fees to 4%, so you don't find out the hard way after you've already negotiated payment on some of the bigger items. Sorry to see the car get chopped but understand that's the best way to get your money. Hope all goes well with the sale. Link to comment Share on other sites More sharing options...
Comitatus Posted October 23, 2008 Author Report Share Posted October 23, 2008 Interested in the turbo blanket, also I could use the 4 gals of meth. PM sent. PM replied. Link to comment Share on other sites More sharing options...
Comitatus Posted October 23, 2008 Author Report Share Posted October 23, 2008 Thought I'd let you know that PayPal raised their fees to 4%, so you don't find out the hard way after you've already negotiated payment on some of the bigger items. Sorry to see the car get chopped but understand that's the best way to get your money. Hope all goes well with the sale. I didn't know that! Much appreciated... Thanks for the kind words. I'm definitely sad to see it go like this. Link to comment Share on other sites More sharing options...
Comitatus Posted October 24, 2008 Author Report Share Posted October 24, 2008 ACT Clutch/6 Puck Disc - SOLD Remote Terminals - SOLD RB Oil Cooler Lines - SOLD Mazdatrix Oil Filter Pedestal - SOLD Link to comment Share on other sites More sharing options...
Comitatus Posted October 24, 2008 Author Report Share Posted October 24, 2008 Fuel Kit - SOLD • KG Parts FC Fuel Rails • Aeromotive 10 Micron Fuel Filter • Aeromotive A1000 FPR • Marren Fuel Pulsation Damper • -6AN Stainless Braided Lines w/ Earl’s Aluminum Fittings (fuel filter forward) Garrett T04R - SALE PENDING Link to comment Share on other sites More sharing options...
Comitatus Posted October 25, 2008 Author Report Share Posted October 25, 2008 CF Radiator Panel - SOLD Corbeau Harness - SOLD Link to comment Share on other sites More sharing options...
Comitatus Posted October 29, 2008 Author Report Share Posted October 29, 2008 AlkyControl Kit - SOLD Link to comment Share on other sites More sharing options...
Comitatus Posted November 5, 2008 Author Report Share Posted November 5, 2008 Here is what's left: I can do Paypal, but buyer will need to add 4% to the total cost to cover fees. Prices listed in RED, and does not include shipping. If you want to buy multiple things, I'm willing to wheel and deal. Located in Cincinnati, OH 45241. Engine Motor is torn down currently. Selling complete shortblock AS IS with following parts (last rebuild)- $1,500 • S5 TII FC3S ShortBlock • Half Bridgeport Irons by BDC Motorsports • Ported Rotor Housings by BDC Motorsports • Atkins 2mm Apex Seals • OEM Mazda 2mm Apex Seal Springs • Mazda OEM “O-ring kit” • New OEM Oil Pump Chain • New OEM Stationary (main) Gear Bearings • New OEM Rotor Bearings • New OEM Side Seals and FD Springs • New OEM Thrust Bearings • New OEM Oil Control Ring Springs Kit • Solid Corner Seals and Competition “Race” Springs • Later/Thicker Cast Dowel Land Rear S5TII Plate • New OEM Front Plate (Thick Dowel Land) • New OEM Dowel Pins • FD Oil Pressure Regulator • Racing Beat Oil Pan Baffle Plate • New Water Pump & OEM T-Stat Misc. Engine • Banzai Racing Oil Pan Brace & Stud Kit - $110 • Powder Coated FD UIM and Polished TB - $375 includes S5 LIM, spacer, and hardware • Custom Port Matched FD UIM to FC LIM Spacer • Mazda Racing Competition Pulley Set - $175 - Has Rare Earth Magnets in Crank Pulley Transmission • ACT StreetLite Flywheel - $210 Cooling • Koyo Aluminum Radiator - $300 • Black Magic Extreme E-fan - $275 • Samco Sport Coolant Hoses - $90 • Yonaka 26x12x3 Core Intercooler $275 • 4” Turbo Intake Pipe - $30 • K&N Cone Filter - $30 - 4" filter • Custom IC Piping - 2.5” Turbo side & 3” Intake side - Powder Coated - $175 Exhaust • Linder Power Systems Custom Divided Manifold (Ceramic Coated) - $800 • Dual SS EGT bungs (1 per Runner) • Linder Power Systems Custom 3" to 3.5” Downpipe (Ceramic Coated) - $300 • Dual Tial 38mm Wastegates - 11.5psi springs - $200 per WG • Custom 3.5” Stainless Steel Single Exit Exhaust - $800 • Borla XR-1 Oval mid-muffler • Magnaflow Race Series rear muffler Turbo • -4AN Stainless Braided Oil Feed -$100 for both feed/drain lines w/ flanges. • -12AN Stainless Braided Oil Drain • Gotham Racing Turbo Blanket - $125 Fuel • 2 x 720cc Siemen Deka Injectors - $120 - Pending Sale • 2 x 1680cc Bosch Injectors - $150 Ignition • BMEP IGN-1A Coils - $320 including custom Magnecor wires • Custom Magnecor R100 10mm Plug Wires • NGK R6725-105’s - $80 Excellent Condition Electronics • Haltech S3 Hall Effect Sensor - $200 includes custom bracket • Custom Hall Effect Sensor Mounting Bracket by Ludwig Motorsports • Optima Red Top Battery - $80 • Greddy Turbo Timer - $90 • Greddy FC RX7 Turbo Timer Harness - $10 Suspension • Energy Suspension Hyper-Flex Full Bushing Set - Black - $100/Brand new, still in Box Brakes • Brembo Blank Rotors – Slotted, Dimpled & Zinc Coated - $200 for front and rear • Hawk HPS Brake Pads - $75 F/R Gauges Complete set - $1,100 • Defi Link Meter 60mm Oil Pressure - $200 • Defi Link Meter 60mm Exhaust Gas Temperature - $200 • Defi Link Meter 52mm Fuel Pressure - $190 • Defi Link Meter 52mm Oil Temperature - $150 • Defi Link Meter 52mm Water Temperature - $150 • Defi Link Meter 80mm Tachometer w/ Link Indicator Light - $150 • Defi Control Unit II - $100 Interior • Corbeau FX1 Pro Seat - $200 • Corbeau Sliding Dual Lock Driver's Side Bracket - $60 • AutoPower 4 point Roll Bar w/ Diagonal Brace & Harness Bar - $400 - Pick up Only • AutoVation Aluminum FC3S Pedals - $75 • Speed Machine Performance Carbon Fiber Dual Gauge Pod - $150 • Tekniq Auto Suede Wheel/Hub/Snap-Lock System - $315 Miscellaneous • Tial 50mm BOV - $200 • Jazz Vented Oil Breather - $60 Exterior • ShineAutoProject Carbon Fiber Sexy Style Vented Hood - $650 • Sparco Polished Aluminum Hood Pins - $35 Brand New - Still in Package Link to comment Share on other sites More sharing options...
Comitatus Posted December 9, 2008 Author Report Share Posted December 9, 2008 LIM and Bushing Kit - SOLD Mazda Racing Pulley Set - PENDING SALE Link to comment Share on other sites More sharing options...
Comitatus Posted December 9, 2008 Author Report Share Posted December 9, 2008 Also, now selling the shell. It's located in Mount Vernon. PM me for details. Link to comment Share on other sites More sharing options...
kenny Posted December 9, 2008 Report Share Posted December 9, 2008 Seems like a waste of a good car over just a smoked apex seal. Link to comment Share on other sites More sharing options...
John Bruh Posted December 9, 2008 Report Share Posted December 9, 2008 how long is the 4" filter Link to comment Share on other sites More sharing options...
Comitatus Posted December 9, 2008 Author Report Share Posted December 9, 2008 Seems like a waste of a good car over just a smoked apex seal. It was a great car, just couldn't beat the gremlin I guess. It's sad that it never got to perform up to it's potential. Link to comment Share on other sites More sharing options...
Comitatus Posted December 9, 2008 Author Report Share Posted December 9, 2008 how long is the 4" filter 6" long. This is the filter: http://www.jegs.com/i/K%26N/599/RC-4550/10002/-1 Link to comment Share on other sites More sharing options...
John Bruh Posted December 9, 2008 Report Share Posted December 9, 2008 6" long. This is the filter: http://www.jegs.com/i/K%26N/599/RC-4550/10002/-1 sorry same one i have i need a longer one Link to comment Share on other sites More sharing options...
kenny Posted December 10, 2008 Report Share Posted December 10, 2008 That's what she said. Link to comment Share on other sites More sharing options...
Recommended Posts