Jump to content

FS: Rolling Heavy Duty Tables


EVILGTP98

Recommended Posts

http://i442.photobucket.com/albums/qq146/JamieBear666/S6300856.jpg

http://i442.photobucket.com/albums/qq146/JamieBear666/S6300858.jpg

This is the lower coffee table size table, dimensions are 22" tall, 4' long, 24" deep and a picture of the locking wheel setup on both tables.

 

Tall Table

http://i442.photobucket.com/albums/qq146/JamieBear666/S6300860.jpg

Dimensions are 35" tall, 5' long, 30" deep, has same wheel and wheel lock setup as pictured above.

 

These rolling tables are both ultra strong, I weigh in roughly 270 and with the wheels locked I can jump all over it without a slight bit of fear. The tables are metal framed with wood inserts on the legs that are pretty much show. The actual weight is supported by the metal framing behing the wood. The table top is 1 inch thick, made of particle board, the top layer is some type of thin metal sheeting. There is a metal trim around the entire tabletop and the frame that supports the top is made of wood braces supported by the metal frame. The shorter table has a lower shelf just a bit smaller than the tabletop, the taller table has 2 shelves that are half the depth of the top, moved to the front side of the table. These are great tables, i am just moving and I have no place to keep them, my loss is your gain.

 

Short table $75 bucks

Tall Table $125 bucks

 

Only 1 problem, I do not have a truck and no way to transport them, so it ends up being a pick up item, I am bout 2 hours east of Columbus, so we will have to work something out. Pm me with questions or comments, I will work with ya as best I can to get them sold. Thank you.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...