Big T6 turbo setup (minus turbo)

[baron_]

Already sold the turbo

 

now that I sold the TV, here's the rest!

 

 

 

Any T6 turbo will work - S400, TV series detroit diesel turbos, etc

 

I'll sell all this stuff, basically...for the cost of parts.

Tons of work, collecting parts, shipping costs and custom welding = free

 

 

I don't think you'll find a much easier way to go about it. I tried to make this as compact as possible, so it'll work on any setup i ever went with - just plumb to it

I used my own exhaust manifolds, so you'll have to make your own

I about lost a damned finger grinding the hole for the wastegate in that merge transition. 1/2" angle grinders are bad mofo's!

 

 

 

 

Big, new Wastegate (a cheaper one, but new...and big)

60mm i think? I have two extra springs as well, for it

 

 

Merge is a flowmaster piece, with a mandrel river transition to it.

All welded and transitioned pretty nicely to a T6 3/8" mild steel flange

Wastegate i think is SS steel - had it custom welded to the mild

 

 

Two expensive corrugated inner flexes (the good kind)

2.5 mild steel piping - assorted types....with some v-band connections

You'll have to do some modifications, of course...to fit whatever headers you use

 

I probably have some various pieces like a copper T6 flange i'll throw in

 

Also, a 90 degree 5" downpipe (add $50 for this if you want it)

 

 

 

 

So anyway, $350, $400 with the 5" mandrel downpipe

 

The flowmaster piece was $70

Mandrel river transition was 25

The wastegate was $100

The t6 flange was 25, copper flange 5.00 or so

corrugated flex = can't remember, $100 or so - might have been more

and there's 2 or 3 v-bands that were 30/piece

not counting mandrel 2.5" mild steel and other pieces....nor welding costs

 

And took me a solid month to make

All sandblasted inside, i tried to grind most welds clean inside, before moving to the next weld - etc etc.

Not the best job, but it'll get you going quick

 

 

I may be 'obo', but i thought i'd post here before i took it to TurboMustangs for sale section

 

 

I suppose I could separate the flex pipes - $80.00 off if you don't want those two pieces

 

 

can e-mail pics of the stuff

I'm not in Columbus terribly often