Jump to content

3" Steel Driveshaft


slowZ28

Recommended Posts

I have a 3" steel driveshaft made from .083 tubing that was used to connect a 700R4 transmission to a Moser Ford 9" rearend in a 3rd gen camaro. It includes a Spicer yoke (27 spline) and U-joints. The U-joint diameter is 1-1/8”. The width is 3 5/8”.

 

This part was made for the car and not used for very long so it is in great condition. The length from the rearend u-joint midpoint to the seal on the tailshaft is roughly 48.5 inches. U-joint to U-joint midpoint is roughly 45.5".

 

$100.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...