TurboNova Posted April 2, 2009 Report Share Posted April 2, 2009 I have an edelbrock performer rpm camshaft and matching lifters and double roller timing chain, run in a street weekend warrior/cruiser for one year (less than 600 miles) 210 new from jegs. very nice cam, great lopey idle with the benefits of good engine vacuum i dont have the cam card readily available but you can get them from edelbrocks site or jegs 90 or any trades Link to comment Share on other sites More sharing options...
nurkvinny Posted April 2, 2009 Report Share Posted April 2, 2009 Rough idea of specs? Link to comment Share on other sites More sharing options...
Vulcan900 Posted April 2, 2009 Report Share Posted April 2, 2009 +1 if you can get some more info or a part number so I can get more info that would be great. Thanks Link to comment Share on other sites More sharing options...
TurboNova Posted April 2, 2009 Author Report Share Posted April 2, 2009 #7102 ENGINE: CHEVY 283-400 V8 RPM RANGE: 1500-6500 Duration at 0.006" Lift: Intake: 308° Exhaust: 318° Duration at 0.050" Lift: Intake: 234° Exhaust: 244° Lift at Cam: Intake: 0.325" Exhaust: 0.340" Lift at Valve: Intake: 0.488" Exhaust: 0.510" Timing at 0.050" lift: Open Close Intake: 10° BTDC 44° ABDC Exhaust: 59° BBDC 5° ATDC Centerlines: Lobe Separation - 112° Intake Centerline - 107° jegs link cam http://www.jegs.com/i/Edelbrock/350/7102/10002/-1 http://www.jegs.com/i/Edelbrock/350/7800/10002/-1 timing chain Link to comment Share on other sites More sharing options...
TurboNova Posted April 9, 2009 Author Report Share Posted April 9, 2009 BUMP FOR A GREAT CRUISING/STRIP CAM Link to comment Share on other sites More sharing options...
Recommended Posts