Guest Removed Posted July 17, 2009 Report Share Posted July 17, 2009 which intake to use though and I was wanting to use the barry grant plate after the tb tb is ok..under 150, but the ends still run lean.... Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted July 17, 2009 Report Share Posted July 17, 2009 I have a gt40 with half inch spacer fits fine dave had same intake with 1 inch spacer fit as well it only kinda fits I had to cut all the bracing out of the hood and use low profile engine mounts and it still kisssed the hood a couple times Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted July 17, 2009 Report Share Posted July 17, 2009 tb is ok..under 150, but the ends still run lean.... the cheater fix is 255lph forced induction pump 24lb injectors on the corners and 19lb injectors in the middle then you can spray 175 through the tb Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted July 17, 2009 Report Share Posted July 17, 2009 triple and the plate that goes in between the upper and lower is the best way Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted July 17, 2009 Report Share Posted July 17, 2009 triple and the plate that goes in between the upper and lower is the best way fogger in each runner..or 8 dry nozzles and a grounding chip for spray tune Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.