Jump to content

Irene


4EYE3D

Recommended Posts

The Story: Im going to Lincoln Tech. starting August 5th and wanted a project car for this summer. Looking around i became more and more interested in a 5.0 Mustang around the years 1979-1986. Known as 4 eyes for its headlights. Found one for a hell of a deal told the guy iI wanted it and he sells it out from under me for $50 more an hour befor i get there with my money. Started the search all over again and found this beauty.

http://picture.vzw.com/mi/416425134_1444409562_0.jpeg?limitsize=580,480&outquality=56&ext=.jpg&border=1,0,0,0http://picture.vzw.com/mi/416424537_1444407329_0.jpeg?limitsize=580,480&outquality=56&ext=.jpg&border=1,0,0,0http://picture.vzw.com/mi/416424013_1444405490_0.jpeg?limitsize=580,480&outquality=56&ext=.jpg&border=1,0,0,0http://picture.vzw.com/mi/416422091_1444398724_0.jpeg?limitsize=580,480&outquality=56&ext=.jpg&border=1,0,0,0

 

I realized most of my time will be spent on CR talking about my car and realized I would be just another guy with a 5.0 Mustang and decided I could be one of the first guys to have a z31 on CR. Bought the car for $1300 with 110,000 miles on body and tranny and a freshly swapped VG30E with 67,000 under its belt.

Link to comment
Share on other sites

LolRyan and I decided to get a little ingenuitive with our senior tag game, some say we took it too far. I say it was just right.

20 Gallon air compressor with 4 gallons of water mounted with bungee cords upside to allow water to flow out through hose to spray nozzle strapped to my seat belt.

http://www.ryanhallarn.com/wp-photos/20090521-172315-1.jpg

Link to comment
Share on other sites

Just pulled out the motors for the headlights and mounted them to the body so they stay down all the time.

http://picture.vzw.com/mi/416421809_1444397702_0.jpeg?limitsize=580,480&outquality=56&ext=.jpg&border=1,0,0,0http://picture.vzw.com/mi/416421195_1444395570_0.jpeg?limitsize=580,480&outquality=56&ext=.jpg&border=1,0,0,0

Link to comment
Share on other sites

Guest Removed

you want it injected or carbed?...lol

 

if you go injected, make sure you get the mass air stuff...

 

find a wrecked 5.0 95 or down. the 94-95 intake might make it easyer on plumbing the intake in that engine bay.. but not really needed.

Edited by Removed
Link to comment
Share on other sites

Guest Removed

motor should work..not sure if its a forged roller motor or not, but it will get the car running. not sure if you can use the harness for the swap..

 

i take it you want manual trans tho?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...