draggin50 Posted June 12, 2010 Report Share Posted June 12, 2010 Im thinking of selling my Gould #15 1992 Mustang GT. I have tons of pictures of the progress that has been made and almost everything is new. It has 89000 miles on the body and only a few thousand on the motor. Also cover car for MMFF magazine March 2002 It has a 347 built by Mike Bell at Dayton Performance. Here is the specs on it. Engine:Stock block, Align honed, Decked parallel with mains, Bored and torque plate honed, Coated cam bearings, Brass core plugs DSS main support, (block was align honed with girdle on) ARP main and head studs Probe forged steel crankshaft, H beam forged probe rods, Dished .030 forged SRS dished pistons, 9.5 cr Assembly balanced by Mike Bell to 28 oz, Complete assembly blueprinted, Moly file fit rings, Clevite 77 bearings Custom grind cam by Mike Bell for supercharger application, FRPP roller lifters, FRPP spyder and dog bone kit TFS pushrods, TFS Track Heat heads, no porting, TFS black valve covers Chrome dual sump oil pan and new pick up, Melling oil pump, ARP oil pump driveshaft Racemaster balancer, Racemaster billet gear double roller timing chain New timing chain cover from Ford, New water pump FRPP hardened cam retainer plate, ARP cam bolt and Crank bolt Cometic Head gaskets, FelPro gaskets everywhere else. It also has Edelbrock Victor 5.0 upper and lower plumbed for a fogger and BES ported, 75 mm throttle body, 42lb injectors, Pro Flow 85 mm MAF, Comp Ultra Gold 1.6 rockers, BBK cold air kit, MSD Pro Billet Distributor, and Spec Billet flywheel. It made 341 hp and 381 ft lbs N/A and has run a best of 12.06 @112 so far. I have only had it to the track 1 time so far and made 2 passes. The body has a 3 inch cowl hood, Saleen wing, Cobra grille insert, and GT40 rear bumper cover. Full cage inside with ARC switch panel, 99 up leather Mustang seats, full grey interior minus back seat. Battery is in the rear in a sealed Moroso battery box and is a new Exide Orbital battery. The fuel system is all Aeromotive with A1000 pump, 2 filters, and A1000 regulator and all 1/2 push lock hose and fittings. It also has tubular K-member, Eibach Drag Springs with airbag, subframe connectors, driveshaft loop, aluminum driveshaft, aluminum radiator with electric fan, Competition Engineering struts and shocks, 3.73 gear, 1/2 studs, BBk long tube headers, X pipe, Flowmasters, solid motor mounts, and a bunch of Auto Meter Gauges and a 5 inch tach with shift light. It is on 4 lug Weld Drag Lites 15x3.5 front and 15x10 rears with new ET Streets. It also has a Astro Performance T5 with UPR shifter. The car is not perfect and the paint is starting to show its age. There is a scratch in the hood and where the rear quarters was rolled the paint is chipped and it has a few others and it needs an alignment. It is a sun roof car as well. Im sure sure there is more I forgetting but Im looking for a quick sale cause Im buying another house. $10,000 firm http://i661.photobucket.com/albums/uu339/draggin50/IMG_0455.jpg http://i661.photobucket.com/albums/uu339/draggin50/IMG_0456.jpg http://i661.photobucket.com/albums/uu339/draggin50/IMG_0283.jpg http://i661.photobucket.com/albums/uu339/draggin50/IMG_1254.jpg http://i661.photobucket.com/albums/uu339/draggin50/IMG_0836.jpg http://i661.photobucket.com/albums/uu339/draggin50/IMG_0632_1-1.jpg Link to comment Share on other sites More sharing options...
Recommended Posts