Jump to content

tranny question 96 ram 360


Twistedrx7

Recommended Posts

So while being the DIY guy i am,i decided to put in a shift kit in the valve body while i was replacing the filter and fluid. well while removing the valve body the last thing was the shift lever inside the tranny. When making more room to remove the eclip i shifted it out of park and into D i believe. as the truck rolled back a tiny bit and then stopped.

 

 

When i went to hook the valve body back up the truck doesnt want to shift into anything. I can move it from P to N but not into D. Im guessing i will have to push the truck forward to take some weight off of things to get it to actually shift where it needs to be? The truck is on a sloped driveway,

Link to comment
Share on other sites

i believe what you moved is the parking pawl, if doesnt get put back in correctly it wont go through the gears correctly or sometimes even at all

 

ya i noticed that, i was doing this on an incline and it didnt want to move. So when i did it on a level surface and took it back apart the pawl came back out. So i put it back in correctly and got the valve body in correctly. However the damn valve body isnt shifting it correctly. Might just be the B&M kit compared to the transgo or something.

 

Might just pick up a stock valve body and put that back in.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...