POR15 locally in stock?

[Das Borgen]

anyone know where I can get some POR15 locally in Columbus?

 

http://www.por15.com/images/POR15GallonQuartPint_300.jpg

 

 

it s an anti/preventative rust paint

 

 

thanks!:bangbang:

[Nickey4271647545519]

Looks for a product called Amerlock 400(also you might find it under then name AmerCoat) . Its a PPG product(PPG bought Ameron who made they product), it's so much better than POR 15. If memory serves me right, it's a hell of a lot cheaper than POR15 also.

[Igor]

Looks for a product called Amerlock 400(also you might find it under then name AmerCoat) . Its a PPG product(PPG bought Ameron who made they product), it's so much better than POR 15. If memory serves me right, it's a hell of a lot cheaper than POR15 also.

 

This, POR15 although a great product has its fair share of flaws. AmerCoat should be available locally through any PPG reseller.

[Das Borgen]

thanks for the suggestions

 

 

any place off the top of your heads for either/or product?

 

I m putting some reinforcements on a weak area of my car tomorrow evening and I need to find the stuff tomorrow afternoon. I don t want to have to use normal spray paint

[Nickey4271647545519]

Not off the top of my head, but another beauty of amercoat over POR15 is that you can put it on parts that already have rust on them and it actually inhibits the rust. Where as, if you did this with POR15 it'd come off in a couple months if not a couple of weeks.

[starkmaster03]

I bought some from the Sherwin Williams in Whitehall off of Main Street. They sell automotive paint there. How much do you need I know I have some left but I'll have to check and see how much.

[AJ]

what color? i have gray, clear and black.

[Das Borgen]

i need enough to cover about two adult hands size area

 

http://i239.photobucket.com/albums/ff273/eagle483/M3/Iraq%20Install%20Stuff%20May%2009/IMG_2163Large.jpg

 

 

it s where the rear trailing arm bolts to the body

 

 

 

what stuff exactly do you have starkmaster?

any other places on the northwest side or closer to dublin? I m willing to go to whitehall but damn that s far

[Das Borgen]

AJ, how can I reach you? gray or black is fine....my car is silver

 

 

how long does the POR take to dry?

[AJ]

yeah por15 won't stick to that.

[Das Borgen]

open to other suggestions and where I can go buy it locally then

[Nickey4271647545519]

Ohio Auto Kolor is a PPG dealer, you might try them

[starkmaster03]

I have the pod15 in gloss black and I'm sure its enough for what you need if it will work. I work in the mornings up off of sawmill and can bring it with me if your interested.

[Buckeye1647545503]

http://www.kbs-coatings.com/

Jegs sells it.

You will want to ruff up the paint more to increase the stick

[twistedfocus1647545489]

http://www.kbs-coatings.com/

Jegs sells it.

You will want to ruff up the paint more to increase the stick

Seems to be good stuff. If you go that route - Follow the directions.

 

I used the sampler pack on the bottom inside seam of my Jeep doors. The directions are very specific on how to prep the surface, but I'm lazy and just cleaned it and smeared the coating on. It still did a decent job in the last ~year I have had it on there but some of the worst spots are starting to spread a bit. I know another guy who used it for the same thing, but prepped it per the instructions, and his is holding up fine.

[99FLHRCI]

Does any of this stuff come in flat black?