Stampede Posted February 21, 2011 Report Share Posted February 21, 2011 pump replacement diagram? It's the V6. Thanks. Quote Link to comment Share on other sites More sharing options...
nurkvinny Posted February 21, 2011 Report Share Posted February 21, 2011 What exactly are you looking for? A step-by-step how to or an exploded diagram, or ??? Quote Link to comment Share on other sites More sharing options...
Stampede Posted February 21, 2011 Author Report Share Posted February 21, 2011 An exploded diagram or step by step, doesn't matter. Thanks. Quote Link to comment Share on other sites More sharing options...
99FLHRCI Posted February 22, 2011 Report Share Posted February 22, 2011 http://alldatapro.com/alldata/PRO~V205735569~C28917~R0~OB0~P3R0H~N/0/34870081/56418679/56418690/56418693/34853741/100411974/34856156/34856543/34849613/105633565/42265808 http://alldatapro.com/alldata/PRO~V205735569~C28917~R0~OB0~P3R0H~N/0/34870081/56418679/56418690/56418693/34853741/100411974/34856156/34856543/34849613/105633565/42175433 NOTE: The water pump bolts directly to the engine block, using a gasket for pump-to-block sealing, Fig. 32. The water pump is driven by the timing belt and is serviced as a unit. 1. Disconnect battery ground cable. http://alldatapro.com/alldata/PRO~V205735569~C28917~R0~OB0~P3R0H~N/0/34870081/56418679/56418690/56418693/34853741/100411974/34856156/34856543/34849613/105633565/42175415 3. Place a jack under engine to support and slightly raise engine, then remove engine mount bracket, Fig. 14. Fig. 15 Timing Belt Cover http://alldatapro.com/alldata/PRO~V205735569~C28917~R0~OB0~P3R0H~N/0/34870081/56418679/56418690/56418693/34853741/100411974/34856156/34856543/34849613/105633565/42175417 4. Remove timing belt cover, Fig. 15, then mark belt running direction for reinstallation. 5. Loosen timing belt tensioner, then remove belt and crankshaft sprocket flange shield. 6. Drain cooling system. 7. Remove water pump mounting bolts. 8. Separate water pump from water inlet pipe Fig. 32, then remove water pump. 9. Reverse procedure to install, noting the following: 1. Use a new O-ring on water inlet pipe. 2. Torque water pump mounting bolts to 27 Nm (20 ft. lbs.). 3. Refer to Engine/Timing Components/Timing Belt/Service and Repair for timing belt installation and tensioning procedure. See: Engine\Timing Belt\Service and Repair Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted February 22, 2011 Report Share Posted February 22, 2011 its behind the timing cover driven by the timing belt you can't actually see it w/o tearing the motor down a little Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.