TheBussman1647545507 Posted October 16, 2011 Report Share Posted October 16, 2011 (edited) I thought I was going to keep this car forever but I came across a deal on something better and now she has to go, I'll be taking another loss on this car. Chassis has 265,xxx miles. Engine: It's a silvertop 4age 20v with VVT. I built the motor myself, all stock except for a TRD headgasket, bowl blended and polished head, and the head was shaved down to the limit. All machine shop work done by M&M head services including a valve job. Valve cover and surge tank powdercoaded by performance powdercoating. Plastic parts painted by Tongda autobody. Revs to 7,500 RPM. Motor has less than 5,500 miles on it. other mods included: Polk speakers in the front doors Pioneer 6x8s in the rear deck Kenwood head unit with aux hookup and cable Audiobahn 800watt amp Audiobahn 10" sub. Uhaul trailer hitch OEM trailer wiring kit A/C delete Other parts I've replaced while I've owned this car: rear struts and springs, front ball joints. 85 MR2 wheels 88 Toyota Cressida seats in great condition (Super comfy) New OEM axles OEM Clutch kit OEM Master and slave cyl front hawk HPS pads front rotors brake and clutch fluid flushed. Problems: Yes I know you can see that big green pair of pinch pliers still on there. That is the idle control valve... for now. It's the only thing I couldn't figure out during the swap. The valve works just isn't being commanded by the ECU. It must be missing an input. I haven't spent very much time trying to figure it out yet either. i may figure it out soon. It idles a little high warm and a little low cold but it's not that problematic really. The oil control valve for the VVT is leaking internally, I've located this part for $63, new the only problem is it takes about 6 weeks for it to come in. I f you want I can make a block off plate, you could still drive with no vvt, but no oil leak either. The custom power steering lines are hand made by me and I only planned to use them temporally until I could get some professionally made, they could be formed a little better, and they have begun to leak now too. I have found a place that will make them though. The e brake cables just seized up recently too. Tires are cheap but have 3/4 tread and perfectly even wear as this car was frequently aligned. there is some rust as pictured, the underside is fine though, It has been "rust proofed" obviously that plan didn't turn out too well but I think it helped. $1400 http://i.imgur.com/FXId9l.jpg http://i.imgur.com/SD0dDl.jpg http://i.imgur.com/2niFLl.jpg http://i.imgur.com/Nyympl.jpg http://i.imgur.com/paiHil.jpg http://i.imgur.com/Ze4Hol.jpg http://i.imgur.com/awxbvl.jpg http://i.imgur.com/bWgZPl.jpg Edited October 17, 2011 by TheBussman Link to comment Share on other sites More sharing options...
Crossle Posted October 16, 2011 Report Share Posted October 16, 2011 Sleeper!!! That's cool as hell. Link to comment Share on other sites More sharing options...
mjrsplat Posted October 16, 2011 Report Share Posted October 16, 2011 Has this car seen the dyno or is 200 hp just an assumption? Link to comment Share on other sites More sharing options...
TheBussman1647545507 Posted October 17, 2011 Author Report Share Posted October 17, 2011 Has this car seen the dyno or is 200 hp just an assumption? It's a 1.6L so that's 160 HP an no it hasn't been dyno'd but that's what the motor makes stock at the crank. Link to comment Share on other sites More sharing options...
mjrsplat Posted October 17, 2011 Report Share Posted October 17, 2011 It's a 1.6L so that's 160 HP an no it hasn't been dyno'd but that's what the motor makes stock at the crank. Right on, I fail. I thought these were 2 liter motors. Moving on. Sounds like a neat car, if only I had room for it. I should quit slacking and sell my spare car. Link to comment Share on other sites More sharing options...
mjrsplat Posted October 26, 2011 Report Share Posted October 26, 2011 (edited) Please negotiate prices via pm. Thanks Edited October 27, 2011 by wnaplay Link to comment Share on other sites More sharing options...
Captain_Panic1647545539 Posted October 28, 2011 Report Share Posted October 28, 2011 lol @ MR2 triangles Link to comment Share on other sites More sharing options...
TheBussman1647545507 Posted November 9, 2011 Author Report Share Posted November 9, 2011 (edited) SOLD Edited November 27, 2011 by TheBussman Link to comment Share on other sites More sharing options...
Recommended Posts