FS: Soarer 1jz/r154 drop out + other aftermarket stuff.

[BIGGU]

So to put it lightly Ive got some stuff to sell.

 

First and for most, No trades and DO NOT LOWBALL ME. The prices are very fair for what your getting.....

 

First things first, REAL soarer 1jz with a Soarer r154. Came out of a 1995 Soarer and came in the form of a half cut so everything is there. Comes with everything to drop into a 5 speed SC300 nothing else will be needed except an intercooler which you can buy here as well. Engine has exact miles unknown but it should be 55-60k. Timing belt, water pump was just replaced 2 months ago. Waterpump is toyota OEM, with OEM timing belt.

 

I do not want to split this up, the only things I will split up are the ECU package.

 

Soarer 1jz

Soarer r154

C's Short shifter (RARE!)

Soarer 2 piece drive shaft

XTD clutch and pressure plate

Toyota OEM Water Pump

Toyota OEM Tensioner

Toyota OEM Ideler pully

Toyota OEM Crank bolt

Toyota timing belt

Wiring harness is extended for a LHD car

comes with Ignitor, OEM Map sensor and SOARER powersteering res

 

In the pictures its single turbo format, Stock twins are going back on

 

but Im asking $2800 for everything there. Price isnt for everyone but its EXTREMELY fair for a complete drop in setup that is already got all the maintenance done. The engine is clean as can be and there is no gunk/sludge inside.

 

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0808.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0809.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0810.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0817.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0828.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0830.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0834.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0835.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0897.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0898.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0899.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0900.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0907.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0908.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0909.jpg

[BIGGU]

HKS 2jz/1jz Cam gears, 1000 miles MAX

$250

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0841.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0896.jpg

 

HKS Timing belt, 1000 miles MAX

$150

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0827.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0896.jpg

 

Greddy Clear timing cover 1jz Some marking in the plastic but still looks good

$200 or $150 with your stock cover (in good condition)

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0826.jpg

 

GT40 Single turbo kit for 1jz includes:

Precision GT4067 w/ .68AR exhaust housing, 4" v-band exit, and 4" inlet

Drewgo T4 exhaust manifold

Oil feed lines and fittings

Oil drain lines and fittings

Tial 44mm Gate Purple

Screamer pipe

3' downpipe with flex section in it and heat wrapped (4" vband flange)

HKS Intake filter and intake pipe

There is absolutly no play in the turbo!

 

$1500

 

 

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0817.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0818.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0894.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0895.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0896.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0897.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0903.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0904.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0912.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0913.jpg

 

exhaust on the flex is from where the screamer pipe was

[BIGGU]

Tial 50mm BOV, Silver comes with vband clamp and gasket , 11 psi spring

$150

 

 

 

Next is a HDI intercooler setup for a SC300. Has all the piping you need for a single turbo setup, all couplers upgraded to Samco ones and T bolt fittings $400

Does not include Tial but can be purchased extra

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0836.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0902.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0905.jpg

 

Fluidyne MKIV supra radiator + Flex alight fans this is the best aftermarket cooling combo you can have $550 comes with a fan controller

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0822.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0823.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0906.jpg

 

1 Recaro Pole Position SPG, GREAT shape only one small mark on it and you can see it in the pictures. FIA certified. super comfortable but im keeping my sparco Evo. $550

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0811.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0812.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0813.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0814.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0815.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0816.jpg

 

Greddy Trust shift knob 5 speed

$50

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0922.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0838.jpg

[BIGGU]

Prothane front bushings SC300/400 not used

$45

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0842.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0920.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0921.jpg

 

AEM Uego, unknown miles, one wire in the harness isnt all the way in however its a signal output so no big deal. Worked well in the car.

$125

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0916.jpg

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0917.jpg

 

Greddy 60mm boost gauge with the data link unit.

awesome gauge, just dont have use for it. 2 Bar gauge has the warning and remember functions

$150

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0914.jpg

 

RJS Latch type harness kits in Purple, Have two of them both SFI approved

$50 each

http://i18.photobucket.com/albums/b107/2zumeunos/Forsale/partout/DSC_0901.jpg

 

 

Precision 65lb injectors

$275

 

TTC Top-Feed Fuel Rail fed by -8AN line

$200

Aeromotive Fuel pressure regulator

$150 comes with -8an fittings, block off and a regular fuel hose fitting.