Skinner Posted December 8, 2011 Report Share Posted December 8, 2011 the wifes van has started having a issue with the rear turn signal lights will stop working. I go to check the bulbs and they are good check the contacts and the appear to be ok. I have even bent the contact tabs out a bit to ensure good contact. Last night was fooling with it and everything was tight and connected and it they started working again. Wife called me today and said on the way home the pass side started not working. not sure if its the socket the blub plugs into or if its board/connect that the blub holder plugs into. Searched the net did not see anything out there that could cause this. any ideas? Quote Link to comment Share on other sites More sharing options...
Rocky31186 Posted December 8, 2011 Report Share Posted December 8, 2011 If its the type with the big circuit board on the back that's probably bad. That's what the rams had and they were junk. Quote Link to comment Share on other sites More sharing options...
Skinner Posted December 9, 2011 Author Report Share Posted December 9, 2011 If its the type with the big circuit board on the back that's probably bad. That's what the rams had and they were junk. yeah the connector plugs into what looks like a board then the the 2 lights snap in at either end. Is the board replaceable or am I going to have to buy a new taillight? Quote Link to comment Share on other sites More sharing options...
Rocky31186 Posted December 9, 2011 Report Share Posted December 9, 2011 It was replaceable for the ram's, not sure on the van's Quote Link to comment Share on other sites More sharing options...
Rocky31186 Posted December 9, 2011 Report Share Posted December 9, 2011 http://columbus.craigslist.org/pts/2676365928.html Theres a new one for the pass. side Quote Link to comment Share on other sites More sharing options...
Skinner Posted December 9, 2011 Author Report Share Posted December 9, 2011 that just happens to be the side I need. lol going to look at it more tonight. Quote Link to comment Share on other sites More sharing options...
Skinner Posted December 10, 2011 Author Report Share Posted December 10, 2011 got it fixed bent the tabs out on the connecter a bit and lights work again. really stupid design Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted December 10, 2011 Report Share Posted December 10, 2011 call me if you need a new circuit board and I will see what I can find on the cheap Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.