jonan Posted April 20, 2009 Report Share Posted April 20, 2009 (edited) Evaporust, has anyone used this product to remove tank rust? most auto parts store carry it.ive looked at strip and seal products(kreem, POR15,etc) and im hesitant to use one...the directions say to fill tank and let it sit for an hour, turn sit an hour, etc until results are acheived. which brings us to the real problem. the tank cap seal is old and fucked. ive searched and called many shops online and around town and theyve all told me im sol. so does anyone have any suggestions on where i could obtain some fuel grade rubber or something to make one? its about 1/2" thick and about 3" in diameter.on another note i would have just taken it to a radiator shop and had them dip it or what ever they do to strip the tank inside and out, but the prev owner put a sweet factory paint job on the tank, fender and side covers and its soo well done i dont want to fuck it up.finals are in 2 weeks, by then the tank will be done, i'll reinstall the radiator and a few other components and i'll finally be cruising! ...a season later.... Edited April 22, 2009 by jonan Quote Link to comment Share on other sites More sharing options...
jonan Posted April 22, 2009 Author Report Share Posted April 22, 2009 ttt Quote Link to comment Share on other sites More sharing options...
bigbluebird Posted April 22, 2009 Report Share Posted April 22, 2009 go to sears hardware and check the plastic misc parts containers in the bolt isle i found my 3 inch rubber stopper there when i kreemed my tank Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.