Jump to content

Tuning a turbocharged CBR929RR tomorrow!!


DTM Brian
 Share

Recommended Posts

Best horsepower was 145. I also believe there to be an issue with the ignition system because of the spark blow out during the pulls.

Lets just say I think we have a work in progress. The turbo makes 7 pounds of boost. The A/F's are a boost friendly 11.5 to 12. However the bike would not make power. I am suspecting excessive back pressure between the cylinder head and turbo. The turbo was off a old school volvo. It is possible the turbo is not a good match for a engine displacing less then a liter of displacement. Turbos are not created equal. You can two different turbos with the same boost and have totally different results.

Bike also had 3 trouble codes in the ecm. The customer is going to start with resolving the trouble code issues and do a little more testing and we will resume tuning.

Link to comment
Share on other sites

I would have to say the heat range on the plugs is WAY too hot, the ECM isnt used to seeing boost so he may have to confuse it with a bleeder setup on the MAP sensor.

I would say the turbo would be enough for that motor being thats its setup for a 2.2, its either his manifold isnt setup right or the cam timing isnt right for boost

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...