SHIEF Posted January 16, 2015 Report Share Posted January 16, 2015 (edited) This is complete from top to bottom, including blower. Bolt in and go. Engine is still in car so it can be heard running. Makes a little over 800hp (guessing based on times/weight) at only 5.5% od on blower. Blower can be turned 20% all out. Can run pump gas 93 and make over 700 pretty easily. I'll do a short parts list and give a detailed one to interested buyers. Have all receipts for parts installed. Everything is a year or less old, except short block which will be 2 years in November this year. Very limited street miles put on it, maybe 600 miles or so. -383 010 block -All Eagle rotating assembly 8.1 CR L19 rod bolts 6" rods. Short block done by Bob Beach -Double keyway crank and balancer (Ati) -AFR 220 cnc comp heads -Scorpion 1.8 rockers -Comp Cam solid blower cam/lifters (lift is .651 with rockers) -871 Dyers blower -2 750 KB Carbs blower carbs -Mezeire electric water pump (55gpm) -Cloyes timing cover, and gear drive timing set -Arp Studs -AFR Stud girdle -Milodon oil pump and pan -Brad Penn 10w30 oil always used and oil changed in Nov. Anything I forget I'll add. Any other pics needed just ask as I only have a few right now. http://i1285.photobucket.com/albums/a587/shief13/20140530_184647_zpstapjbxvu.jpg http://i1285.photobucket.com/albums/a587/shief13/20140522_154513_zpsuoadplkt.jpg http://i1285.photobucket.com/albums/a587/shief13/20140522_173747_zpsifdsig3j.jpg http://i1285.photobucket.com/albums/a587/shief13/2013-10-07143719_zps2d17259e.jpg http://i1285.photobucket.com/albums/a587/shief13/2013-10-07144011_zps833eae2c.jpg http://i1285.photobucket.com/albums/a587/shief13/2013-10-07143809_zps99230b35.jpg http://i1285.photobucket.com/albums/a587/shief13/2013-01-07212750_zpsfd4c5043.jpg Edited January 17, 2015 by SHIEF Link to comment Share on other sites More sharing options...
Recommended Posts