Jump to content

Drag Radials and front runners


Bullnugget

Recommended Posts

Have a set of Nitto NT05r 305/45/18 drag radials mounted on a set of American Muscle AMR Mustang reps....18x10, 5x114.3 +24 offset.

 

Tires have less than 15 passes on them, and wheels are brand spanking new, only mounted on car to check fitment. Tires have been balanced as well.

 

Looking for $650 firm

 

Also have a set of M&H front runners. 26" tall and 17" wheel. I bought these and intended to use them on a set of spares...but spares are 18's and 17" spares wont fit my car without spacers. They are used, unsure how many times....I was under the assumption they had a couple years in them...I donno....only paid $50, so looking for that back.

 

http://i1324.photobucket.com/albums/u618/Andy_McPeck/20160307_141447_zps4njvuy8e.jpg

 

http://i1324.photobucket.com/albums/u618/Andy_McPeck/20160307_144833_zpspqhr7u6g.jpg

 

http://i1324.photobucket.com/albums/u618/Andy_McPeck/20160308_121719_zpsauu2ro7n.jpg

 

http://i1324.photobucket.com/albums/u618/Andy_McPeck/20160307_144818_zps4rlfifxv.jpg

 

http://i1324.photobucket.com/albums/u618/Andy_McPeck/20160308_121803_zpsxljyntey.jpg

 

http://i1324.photobucket.com/albums/u618/Andy_McPeck/20160308_121810_zpsxyyavpds.jpg

Link to comment
Share on other sites

I didnt. A friend ran them on his charger on a much smaller wheel before he wiped a lifter. He sold them to me. I test fitted them today, they would work with a small spacer or some unwanted body work (read big f'ing hammer) but I decided to find some 17s anyway
Link to comment
Share on other sites

  • 4 weeks later...
I know there's a Mustang owner out there who needs a set!

 

Or Marauder owner..... I literally just bought a set of M/T 305/45-18's. I could have saved a couple of bucks and scored a pair of wheels.....story of my life.:mad:

Link to comment
Share on other sites

  • 1 month later...
  • 4 weeks later...
I'm over near Youngstown. Not sure what you mean by the rest

 

Damn Siri , will the rear wheel holes fit a 5/8 lug stud ? I need a set of street wheels for my mustang but have 5/8 studs so ankotnof wheels don't fit

Link to comment
Share on other sites

Damn Siri , will the rear wheel holes fit a 5/8 lug stud ? I need a set of street wheels for my mustang but have 5/8 studs so ankotnof wheels don't fit

I am not sure, but would think so. My lugs are M14x1.5 so whatever that is into sae.

 

Anyway, I am going to keep the tires, but the wheels I won't keep as they won't even fit with half inch spacer. Getting new wheels soon and putting these tires on them. So if you want just the 2 wheels $100. They are brand new never seen the road, just mounted tires on them and tried fitments.

 

Sent from my SAMSUNG-SM-G920A using Tapatalk

Link to comment
Share on other sites

From my quick research that's about 3/8" for my lugs. Where are you at Steve-O? I'd be willing to meet up if you are interested

 

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

Pickerington , you can txt me (614) 735-9361 and discuss

Link to comment
Share on other sites

  • 4 weeks later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...