Crossle Posted September 4, 2016 Report Share Posted September 4, 2016 (edited) This car needs finishing work. Listing to see what sort of interest there is, if any in it's current condition. 1997 Acura 2.2CL Clean title in my name, VIN's on the car all match, no sketchy Honda bullshit 5 speed manual 192K on completely rust free Florida chassis JDM F20B swap from JDM Midwest with paperwork for motor. Lowering springs Adjustable rear upper control arms Adjustable front upper ball joints P28 "Neptune" stand alone - I have no software to communicate with it Wiring specialties harness Innovate wide band Stock exhaust with cat Shift light in vent 17" wheels with new tires Repainted spoiler less trunk lid New head unit w/USB and front door speakers (not installed) New RF lower ball joint Ported upper intake Variable intake runner delete w/ spacer Fresh Honda MTF Mobil1 engine oil New battery (located in trunk) Spare set of 17" wheels that need help New upper and lower radiator hoses, new thermostat New spark plugs New intake manifold gaskets New vacuum lines Comes with spare, blown head gasket F20B motor. The intake manifold, distributer, and alternator are different because the motor I bought is newer than the one that I pulled from the car. Cons: Power steering delete w/ power steering rack, lines have been looped No A/C Previously a smoker car, have already done a lot of cleaning Wiring near computer is a "nest" it's not presentable at all Tint is poor quality, driver window has been replaced and not re-tinted Temp gauge in/op Wide band gauge in/op Wandering idle/won't rev past 4K since I had the computer disconnected while I had the interior at. Was revving past 8K right when I had the motor in. NOW FIXED! Front upper ball joints loose, have new ones that go with the car NOW FIXED! Listen folks, the car still needs some work, I bought it blown motor to part it out and decided to put a motor in it and get it running. I have successfully done that. I'm not a Honda guy at all and it's at a good place to go to a new home to be finished. I will continue to fix things here and there on it, but I figured I would go ahead and list it now in case someone really wants it. The price will remain the same as I fix things although it is negotiable certainly. http://imagizer.imageshack.us/v2/800x600q90/924/r3LoVo.jpg http://imagizer.imageshack.us/v2/800x600q90/923/lx5m95.jpg http://imagizer.imageshack.us/v2/800x600q90/922/O2TU9s.jpg http://imagizer.imageshack.us/v2/800x600q90/921/5wrJ4j.jpg http://imagizer.imageshack.us/v2/800x600q90/921/KLiv1R.jpg http://imagizer.imageshack.us/v2/800x600q90/922/mc40oy.jpg Edited November 23, 2016 by Mitch Link to comment Share on other sites More sharing options...
Crossle Posted September 16, 2016 Author Report Share Posted September 16, 2016 Price drop to $2000, won't budge. I'll continue repairs otherwise. Haven't had time to touch it recently. Link to comment Share on other sites More sharing options...
Crossle Posted October 30, 2016 Author Report Share Posted October 30, 2016 Bump Well, I have no option to edit the original post, so below is the update I have. Price remains the same. Front upper ball joints have been installed. Alignment is happening this week. I believe I may have the idle issue resolved, but I am waiting on a part. Also, I have sold the spare blown motor and spare 17" wheels. Link to comment Share on other sites More sharing options...
Crossle Posted November 23, 2016 Author Report Share Posted November 23, 2016 Bump - Price drop to $1800 Wandering idle has been resolved Still needs some finishing. Link to comment Share on other sites More sharing options...
Recommended Posts