Jump to content

FOR SALE: 1993 BMW 325i (sedan) ‘fully’ built for SCCA SOLO(Autocross) STX


bmwohio
 Share

Recommended Posts

FOR SALE: 1993 BMW 325i (sedan) ‘fully’ built for SCCA SOLO(Autocross) STX.

 

18558750_10154531166201497_2818752019561177630_o.jpg?oh=08e51de5a24838a805c10142f693af27&oe=59A21E51

 

18558917_10154531166226497_359559742443884613_o.jpg?oh=9a01536b3232089ab5904f5f5d68bd21&oe=59BCC16C

 

18671557_10154531166366497_7395529851193365920_o.jpg?oh=29395b8e75b52abd0ecb738945cfb21d&oe=59BB9AF9

 

18619945_10154531187071497_8378561803529937309_n.jpg?oh=0db03df356de402bdde123cc1350a5ba&oe=597684BC

 

Multiple #1 Top PAX wins at local events, and trophy winning car at 2014 Solo Nationals (its only visit to Nationals)

 

I bought this car in complete ‘stock’ form and transformed the car to what it is today.

 

$8,000 with all extras and spare parts

 

This car would ALSO be a great candidate for a HPDE track car/TT/Spec E36 Car. All it would need is a cage, harnesses, and perhaps a few other items.

Custom tuneable with Miller W.A.R. Chip and stock chip (https://www.millerperformancecars.com/store/war-chip/best-bmw-chip-miller-w-a-r-chip-detail )

 

Currently 180hp/171tq

 

This car was COMPLETELY ‘gone through’ from head to toe with new parts (details below).

 

There is NO rust on this car, I specifically found one where the rocker panels and all other parts did not have any rust on them. There are a few ‘blemishes’ here and there on the car, as it is NOT in show condition, but on par for an almost 25 year old car.

 

**There is a small bit of damage on the driver side door that DOES NOT hinder the use of the door being opened or closed, locking the car, or getting in and out of the car. I have a replacement door that just needs painted to match the color and hung on the car, it will be included with the car. Pictures are in the link of the damage. I went an entire season of autocrossing with the car like this, and it was never a problem for me.**

 

All pictures that I documented from this build can be found here, please let me know if you have any questions - http://s976.photobucket.com/user/bmwohio/library/1993%20E36%20For%20Sale?sort=2&page=1

Highlights:

 

Car was ‘transformed’ at 187,089 miles

 

Current mileage 192,779 miles (5,690 miles on rebuilt head, including a trip to Solo Nationals in Lincoln, NE)

 

Engine/Under the Hood:

 

Rebuilt/Refreshed head done at 187,089 miles):

- head was pressure tested, tanked, decked (within BMW spec) and valvetrain was completely rebuilt

-new OEM valve spring retainers

-new OEM keepers

-new OEM valve guides

-new OEM valve stem seals

-fuel injectors were sent away to be cleaned and flow tested back to 100%

-every single hose under the hood was replaced with new OEM hoses

-Vanos rebuilt with new Besian seals

-new OEM Timing chain tensioner piston and spring

-new OEM Timing chain guide rail

-new OEM Oil filter gasket

-new OEM Main drive/AC belts and all corresponding pulleys

-Behr radiator

-Bimmerworld Oil distribution block, which is paired with stainless line for a remote sender to run oil pressure/temp gauges.

-New hoses for the cooling system (yes, every single hose for the cooling system was replaced)

-new OEM Knock sensors

-many new assorted hose clamps

-new OEM valve cover studs (other ones broke)

-new OEM oil pan gasket

-new OEM idler pulleys

-all new OEM power steering parts and hoses

-new OEM high pressure power steering hose with banjo fitting

-new OEM fuel filter

-AKG 75D (red) Motor Mounts and Tranny mounts

 

 

Suspension:

 

-Complete TC Kline Double Adjustable Suspension with 500F/600R Springs (will also come with a BRAND NEW set of 600F/700R springs for different set-ups) with TC Kline Camber plates.

- stock front and rear sway bar and 28MM 2-way adjustable H&R front sway bar included in the sale

-new OEM Meyle HD front control arms

-new 90A Poly Rear Trailing arm bushings with limiters

-RTA pocket reinforcement plates installed

-new OEM Lemforder rear lower control arms

-new OEM eccentric bolts for rear camber adjustment

 

Extras:

 

-Miller W.A.R. Chip which is fully customizable on a dyno through a laptop computer. Included in the sale will be a laptop computer running Windows XP along with the software and all the needed cables to tune the car. Car was originally tuned for 2 hours on a dyno to produce the HP and torque curve it has now. This is includes a Zero speed limiter that can be changed to different RPM’s in the car if you like. This was very useful for Pro Solo’s to test during practice starts on Friday to find the ‘sweet spot for launching at the start.

 

-Custom lightweight Wilwood front calipers (weight 1.5 pounds per caliper) with Ferodo DS2500 Brake Pads front and rear (picture of calipers in photobucket link)

 

-3.15 LSD rebuilt rear differential with 40% lock-up

 

-Recaro Pole Position Driver Seat and Corbeau Passenger seat (both sides included with Schroth Quick release 4 point harnesses with Anti-Submarine technology

 

-Full custom exhaust from the headers back - EBAY lightweight headers with 2 Burns lightweight mufflers with a turn-down just before the rear differential - whole exhaust only weighs 26 pounds!

 

-Oil pump nut is done and secured with safety wire (pictures in photobucket link)

-Car will come with 3 sets of wheels:

-1 set of REAL SSR wheels (unicorn wheels) (15.5 lbs/wheel!) 17x9

-1 set of APEX ARC-8 wheels in gunmetal grey 17x9

-1 set of E36 ‘bottlecaps’ that I was using for ‘travel wheels’ for long trips so I didn’t have to travel on the race tires (All 4 wheels/tires will fit in back seat)

-Spare differential included in the sale (3.15)

-Spare transmission included in the sale

-Spare front fender lines (driver and passenger)

-2 spare front hubs

-2 spare rear half shafts with boots

-All stock suspension with stock springs included

-Both stock front seats (in really good shape) included in the sale too

-Fog Lights (currently uninstalled)

 

 

This list below is one of the larger receipts of parts I ordered for this car - As you can see I always ordered new hardware, gaskets, etc, that needed done while parts were getting replaced. No stone went unturned during this build, it is a SOLID car.

 

 

Accessory Drive Belt Tensioner Pulley; Alternator and/or AC Belt

31126758513MY

Control Arm; Front Lower Left

31126758514MY

Control Arm; Front Lower Right

33321138380

Control Arm; Rear Lower; Axle Support to Trailing Arm;

11531738053

Coolant Hose; 4-Way Hose from Block to Heater Outlet

13541735174

Coolant Hose; Air Cleaner (Warmup Thermostat) to Throttle Housing

13541735173

Coolant Hose; Cylinder Head to Air Cleaner (Warmup Thermostat)

11121726089

Cover Trim Cap for Bolts

11531730351OE

Expansion Tank/Coolant Reservoir Hose; From Expansion Tank to 4-Way Hose

64211394293OE

Heater Hose; Inlet 1; Cylinder Head to Heater Valve

MH10

Hose Clamp; 16-27mm (approx. 0.6 - 1.0 inch); Pack of 10

07129952113

Hose Clamp; 25-40mm (approx. 1.0 - 1.6 inch)

07129952119

Hose Clamp; 40-60mm;

07129952121

Hose Clamp; 40-60mm;

11611738629

Idle Air Control Valve Hose; Connector with O-Ring; Idle Control Valve Hose

13411738185OE

Idle Air Control Valve Hose; Idle Control Valve to Intake

11611730725

Idle Air Control Valve Hose; O-Ring Seal, 24x3.5mm; Hose Connector at Intake Manifold

11281738605

Idler Pulley/Roller; Water Pump/Alternator; Offset Mounting; Water Pump/Alternator Belt, Offset Mounting

0261231195

Knock Sensor/Detonation Sensor

07119963200

Oil Drain Plug Gasket; 14mm Aluminum Seal Washer; 14x18x1.5mm

11421730389

Oil Filter

HU9254X

Oil Filter Kit

11131437237

Oil Pan Gasket

32411097164

Power Steering Fluid Reservoir; With Integral Filter

32411138419

Power Steering Hose; Low Pressure Hose from Reservoir to Power Steering Pump

11531726344OE

Radiator Coolant Hose; Lower Radiator to Thermostat Housing

11531708499

Radiator Coolant Hose; Upper Radiator to Thermostat Housing

32411093597

Seal Ring for Power Steering Lines; 16x22mm

07119963418

Timing Chain Tensioner Spacer Bushing; Aluminum Washer, 26x31x2mm

11311738700

Timing Chain Tensioner; For Upper Chain (Camshaft to Camshaft)

11121718856

Valve Cover Stud; M7/6x29.5mm

11511711484

Water Pump Gasket; O-Ring

 

 

I’m sure there are some things I am forgetting and I will update if needed, so please ask!

I am willing help deliver car and parts within a reasonable distance, just ask.

you can message me or reach me at kbushmeyer@aol.com or you can text me at 614 five eight zero 1 six seven 6.

Thanks!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...