FCR Carb jets in Cols?

[ShawnR]

Does anyone have suggestions where to get main jets for Keihin FCR carbs here in Cols?

I have 160 and I want to bump up to 180 and see if that fixes my issues.

I can just drill them out, but I want to have a spare set since I know that at least it runs on the current ones. The advice I was given was to drill them out 1 size at a time until it runs too rich, then buy the next size smaller. I would rather buy local if at all possible.

[Wheezle]

Those should be DJ series jets so i would recommend that you buy them from dynojet. They are two dollars a jet. Dj does not mean dynojet either.

[ShawnR]

I looked up DJ jets and mine doesn't look like their picture.

Mine has this description:

99101-357. 16.5mm long x 6mm hex. Sizes from 090 to 250.

For FCR, CRS, PWK, PJ, PWM, PE.

I will swing by Iron Pony on the way home, but I'm not real hopeful. In my perfect world, I can "rent" it and return it if I need to go to a different size after testing.

Edited July 21, 2009 by ShawnR

[fox_racing_guy]

Any local MX place should have them, all MX bikes used FCR's up untill last year when F.I. started to make a run.

[ShawnR]

Iron Pony ended up having some in stock. I bought a set of 170s, but I am going to go up to 180s and try again. 160 to 170 made some improvement, but it still ain't right.