Craigslist Posted February 18, 2010 Report Share Posted February 18, 2010 This is the one and only complete modular system for installing accessory lighting on a GL1800. Can be used to install thousands of LED lights with nearly endless possibilities for customizing. I recently installed over 1500 LED lights on a GL1800 trike using this system. Extremely high quality construction giving you the reliability that even the best dealer installation cannot match. Clean and durable construction with no loose wires anywhere. All splices are soldered and shrink-wrapped before being completely wrapped in abrasion resistant wire sheathing. All junctures are shrink-wrapped then coated with plasti-dip. Aviation quality waterproof connectors are placed at the most common service points on the bike: 4 under the rear of the seat, 2 under each side panel, 2 under each front pocket, 2 on the lower triple clamp, and 2 under the front lower cowl for a total of 16 connectors. If this is not enough (I used 12 of the connectors for 1,584 lights) simply use the 'Y' connectors to add more access points. All access points are designed to place connectors at the most common service points making removing body panels with lights installed a simple click of the connector. The wire harness controls three independent circuits for amazing flexibility. The recommended set up is to use RGB lights and then use a controller to create a myriad of color combinations. Simply connect the power leads to the battery and then plug the controller end to a controller or handlebar switch - plug and play.........then start adding lights. This kit comes with the main wire harness, two 12", two 16", and two 24" sub harnesses, as well as two 'Y' connectors. I also have a very nice wireless RGB controller I will give to the first purchaser of this set. This is a brand new product that is not for sale in dealers. It was developed by a technical specialist for American Honda who has worked with over 80 Honda dealers and hundreds of mechanics. This is simply the highest quality most cost effective way to install accessory lighting on a GL1800. We have all seen the good the bad and the rats nests of wiring that often ensues when large numbers of lights are going to be installed. Wire harness will also come with a color wiring diagram - no I'm not kidding - a color wiring diagram - no more mystery wires - seriously. Additional sub-harnesses, 'Y' adapters, and supplies available. I am willing to offer substantial support to DIY'ers that want to try this. For the first THREE buyers I will include FREE installation of the harness and assistance with hooking up lights. We estimate this package will save 10-14 hours of labor for a typical mid sized dealer installed lighting package. Asking $300 Call 859-628-1858 -Jonathan More... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.